LPV Adjunsting per Shackle #2

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 13, 2003
Threads
834
Messages
5,790
Location
North Front Range, CO
My valve is well rusted but can I adjust the valve per the #2 shackle?
#2 shackle is mounted above the axle on the other end from the valve.
Its looks like there could be enough thread to adjust.
Would I adjust it up or down if there is enough thread and how much?
 
Got the nuts off the valve but the valve won't move.
I Used a pry bar to try and budge the valve and the top stud broke off (the one that keeps it centered) and it still won't move.
If I do get it to move I will have a hard time keeping it centered.
I don't want to brake the valve any more.

There is not enough thread to move #2 shack up 3".
Is there a kit to do this or where can I get a longer shackle?
 
I removed the shackle and could adjust the threaded end of it from 5/8" to 1/16"
I either need to get a longer threaded bolt/post welded to the shackle or build up the bracket on the axle.
If I add a bracket to the axle, how much longer do I need to go?
 
Back
Top Bottom