Lower trunnion studs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 8, 2005
Threads
2
Messages
4
My 96 4.5 FZJ 80 is a smart tool over here in the UK until it pisses oil and grease out all over the inside of the right front wheel. The problem I have is that one of the lower trunnion studs keeps dropping out and with it all the lube from the knuckle housing. Any ideas anyone as to why this keeps happening? The new stud is always loctited in place and properly secured. I am now on my 4th stud!
 
as landtank says get the new torx head studs and set them in properly. use a little loc tite

also, if you are getting oil from that hole as against grease then your inner axle oil seal is shot and you need to perform a birfield repack. read up in the faq for more details.
 
Boy I love search. I have the same problem, on the same side. I've had to park mine as the same 2 kept getting loose. I finally lost both, and have one set ready to go in and one on order.
 
Back
Top Bottom