damn, i wish i didn't take that vacation i could have spent the money on this. vacation damn near cost that much that'll be the last time i let her pick where we go.
Louisiana/Area For Sale/Wanted:
- Thread starter PScottBx
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
There is a 1997 LX 450 for sale at Control Concepts on Johnston (Hwy 167) south of E Broussard. It is gold, tan leather, and 206,253 miles. 337-344-1145
There was also a red 40 not for sale with a new top and white wheels in the parking lot, not sure if they have the same owner or if he his a member.
There was also a red 40 not for sale with a new top and white wheels in the parking lot, not sure if they have the same owner or if he his a member.
don't know if this is a repost or not, but saw it and thought I'd throw it out there.
MC
88 Toyota 4Runner
MC
88 Toyota 4Runner
MT Bayou? Man you should have joined my den
Tiger or Wolf? We're going on the 25th. He'll have a blast.
MT Bayou? Man you should have joined my den
Tiger, and yes, Mt. Bayou. We're stoked.
Thats great
bring you a wagon to haul your camping gear you have to park a good ways away from the camping area and the few loaners are usually being used.
man i loved Mt. Bayou!!!
i went like 4 or 5 years in Boy scouts.
i went like 4 or 5 years in Boy scouts.
LOL, I posted that yesterday on here. I like the way that one looks.
LOL, I guess then this is a repost of a repost
It's just a sign that great minds think alike
there is a red '86 regular cab 22r carbed 5spd, in franklin.
it has 232,000 miles it runs but misses pretty bad, didnt smoke when he started it. the valve cover was leaking. the bed is rusted through pretty good along the body line. he said the 4x4 works.
tires are shot and the rims are yellow orangious colored.
he is asking $800 dad offered him $500 and they were going to take it but dad backed out, since he doesnt have time for the project.
it has 232,000 miles it runs but misses pretty bad, didnt smoke when he started it. the valve cover was leaking. the bed is rusted through pretty good along the body line. he said the 4x4 works.
tires are shot and the rims are yellow orangious colored.
he is asking $800 dad offered him $500 and they were going to take it but dad backed out, since he doesnt have time for the project.
WTB: Factory Running Boards
A friend of a friend is looking for some factory running boards for a 91-95, FJ 80?
A friend of a friend is looking for some factory running boards for a 91-95, FJ 80?
- Thread starter
- #952
does anyone have a extra set of rear leafs for yota pickup.
im trying to level my rear with the front. i need about 2" of lift but 2.5" longer shackles only give about 1.25" of lift so i was thinking of adding a main leaf or two from another pack and then getting the rest of my lift from shackles, if anymore was needed. also if i add factory main leafs it shouldn't make my ride any worse cause it should be the same rate on the springs(at least from what i understand, been reading on the internet and you know how reliable that info is)
im trying to level my rear with the front. i need about 2" of lift but 2.5" longer shackles only give about 1.25" of lift so i was thinking of adding a main leaf or two from another pack and then getting the rest of my lift from shackles, if anymore was needed. also if i add factory main leafs it shouldn't make my ride any worse cause it should be the same rate on the springs(at least from what i understand, been reading on the internet and you know how reliable that info is)
Looking for a running 2F Motor ASAP.
I thought I was buying a 2F a few months ago, but it ended up being a 1F motor and I bought it anyways.
If any of you guys need the 1F I would be willing to trade plus cash.
My dad has gained interest in my project and is motivated to get it running. My plan was to pull the 2f in my FJ out to rebuild it and replace the broken rod/s... well when we pulled it, there is a nice 6" long crack on the side of the block. OOPS! The 1F motor was to be a temporary job, but we are more interested in getting the 2F and doing it right the first time!
Thanks
Scott
I thought I was buying a 2F a few months ago, but it ended up being a 1F motor and I bought it anyways.
If any of you guys need the 1F I would be willing to trade plus cash.
My dad has gained interest in my project and is motivated to get it running. My plan was to pull the 2f in my FJ out to rebuild it and replace the broken rod/s... well when we pulled it, there is a nice 6" long crack on the side of the block. OOPS! The 1F motor was to be a temporary job, but we are more interested in getting the 2F and doing it right the first time!
Thanks
Scott
I have some for a 1997. Will they fit? $50 come get em.
WTB LSU tickets
Probably an exercise in futility, but looking for LSU/Bama, LSU/GA tickets.
Probably an exercise in futility, but looking for LSU/Bama, LSU/GA tickets.
See earlier posts, about two pages back. That's a relative of mine. He had gone as low as $500 for all of that. I thought about breaking down and getting it to keep at my grandmothers for hunting...if I thought I could get it running. While I could use the good Cruiser karma, I don't know if I gots what it takes.
78 FJ40 Lafayette
Met him at the last meeting and was planning on joining the club but said he's going to sell it for not having the time to use it. Here is the details.
Had it for 14 years. Asking $10,000. firm, & as you can tell from pictures it is a great cruiser! If you or any one you know is interested or would like some more info, please contact me.
Billy Badeaux
985-397-3991
Met him at the last meeting and was planning on joining the club but said he's going to sell it for not having the time to use it. Here is the details.
Had it for 14 years. Asking $10,000. firm, & as you can tell from pictures it is a great cruiser! If you or any one you know is interested or would like some more info, please contact me.
Billy Badeaux
985-397-3991
I have a grill guard for 99-04 Ford Superduty, its manufactured by Manik 4x4 acess., and its stainless steal. It has a small bend on the lower driver side bar but nothing to serious. It has two holes for lights and mounts to the frame.
These retail for over $400, but I take $100 obo.
These retail for over $400, but I take $100 obo.