Louisiana/Area For Sale/Wanted:

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

No affiliation to sale or seller, a friend passed it along to me

Its in Lafayette


1972 Toyota LANDCRUISER FJ40 - $3800 (Lafayette)

Date: 2010-05-17, 11:16AM CDT
Reply to: sale-uzkns-1745171813@craigslist.org [Errors when replying to ads?]

Landcruiser 1972 FJ40
Moving May 28. Must Sell. Priced to sell.
This is a vehicle with almost no rust.
The chassis has been lifted with an expensive kit. It is equipped with a 2F engine. the front axle has disk brakes. New clutch assembly.
It needs to be completely finished and comes with all the parts necessary to finish the project and plus:
rear jump seats
Roll bar
Soft top and hardware
This project when finished will go for sale in the 15 to 18 000 dollar range. Not including the extra parts that are highly demanded:
1 extra F engine
1 front axle
3 differential case.
1 transmission, etc, etc.
Serious buyer only. No indecent offer. No certified check, No distant sale: only sale in person.
It has to go. $3800. No time to finish it and I am moving at the end of May. Call 512-825-9348

LINK
1972 Toyota LANDCRUISER FJ40

3kc3oc3p05P55S45R3a5hde3c2acb92001778.jpg

3n63p73l25Z55U65R6a5hcc43ba4811f61ee9.jpg

3m93pb3o25Z25P25S6a5h3d71d2ad72a9144b.jpg

3of3p83lb5T35Q25P3a5h6bfddbecbae617a5.jpg

:clap: thanks for sharing Jason I reached out to him to see where he/she is at. There was a local Jeweler with a 71 that looked just like this one he had tried to start a club back in 97, 98 we made one meeting and nothing ever become of it I'm wondering if this is his :hhmm:
 
Olivier is owner, its a North Texas project rig he dropped a 2F in it and started a disc brake conversion on the front end. Its not running as it sits. He has and extra F and drum axle along with alot of extra parts to go with it. He spoke to Dan a few years back and heard about the club.

He's off of Mudd Avenue. Call at 512-825-9348
 
no way!! not going back to push pull!!! going to use it on the passenger side. im going to use the old chevy style "t" steering where the tie rod connects to the tie rod end on the passenger side.

http://www.ballisticfabrication.com/assets/images/steeringkit/tresteeringkit2.jpg

http://completeoffroad.com/images/M36970

edit: this is only cause its cheaper, eventually i will buy the steering arms from 4x4labs.

4×4labs Frombe Steer – High Crossover Steering System | 4×4 Labs

Intersting hope it works for you.
I have seen the leaf sprung jeeps run steering like that.:D
 
Last edited:
Intersting hope it works for you.
I have seen the leaf sprung jeeps run steering like that.:D

i hope so too, it worked for the solid axle gm 4wd trucks so it should.

the only weak link on it will be the stock steering arms.
 
I'm willing to bet that the 85 just has a bad AFM or wiring to AFM.
 
Still need a 305/16 or 315/16 for a spare before the GSMTR trip if someone runs across one. Thanks

You can borrow one of my 315/16 if you want. I don't know if it is on your way but I live about 4 miles off of I-12. I will be out of town so I don't need them.

Edit: I just saw your post on fastest route to get there. I live off of 59 and you could grab your parts on your way back. I know you probably want one when you leave Lafayette but I'm just offering.
 
You can borrow one of my 315/16 if you want. I don't know if it is on your way but I live about 4 miles off of I-12. I will be out of town so I don't need them.

Edit: I just saw your post on fastest route to get there. I live off of 59 and you could grab your parts on your way back. I know you probably want one when you leave Lafayette but I'm just offering.

You're a good man bud, thanks :beer: If nothing turns up here I'll take you up on that. I certainly will plan to pick up the parts on the way home. :)
 
Back
Top Bottom