looking for information on diffs - specs for different years?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 1, 2006
Threads
336
Messages
5,169
Location
Port Coquitlam
Website
www.flickr.com
I tried the search feature and after an hour I gave up, I am looking at the option of installing 80 diffs in my 60 (I'm sure you all have some opinions on that) but I can't seem to find details on what years had what features or upgrades.
I've heard some info from people but nothing specific.
Thank you for any info you can provide.
 
IIRC, everything up to 1990 had a 9.5" chunk in the front. Not sure if it's HP or LP...

The 80 series has an 8" HP front. You'd have to swap the whole axle. I don't think you'll have a problem with the rear, unless it's locked.
 
I would be looking for a FF, and the lockers would be a good feature to find but a manual hub with lockers is rare. Where there any other differences throughout the years? I heard something about the 93 and older ones having improved brakes and different rotors.
 
No. You mean full axle assembly, hub to hub.

All US spec 80s were fulltime 4WD. The installation of locking hubs is easy. Remove the front drive plate and install the locking hub. There are postings as to which ones are bolt on.
 
Back
Top Bottom