Longfield question / grease cap?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 11, 2005
Threads
29
Messages
388
Location
Seabeck, WA
So, I've had my Longfields in for quite some time now. When I got them I went with Bobby's drive flanges as well. After installing them I re-used the outer grease caps. I did have a little difficulty getting them on.

Well, it seems I lost one last trip out wheeling. So I picked up a new set of OEM caps. I am having a heck of a time getting the new grease cap on the drive flange. Any suggestions or shop tricks? I don't wanna mangle the new cap too bad....
 
not really, take your old one off, make sure it is the same inside diameter as the orig. i just rubbed a little wheel bearing grease on the cap and the drive flange, it just slid right on. I also installed the longfields' chromo. I love mine. sorry i couldnt help any more.
 
Sometimes it helps to whack the dust cap a little so it is not completely round, then tap it back on for a tight fit.

Put a little grease in the cap, but not an extreme amount as this can be hard to compress thus forcing your dust cap off.
 
Well, with a little persuasion, I got this grease cap on. Just for the record, a crush sleeve from a differential is the perfect size to fit over the cap...

3645212388_7ba84b3249.jpg
 
Back
Top Bottom