Long Time Lurker...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 6, 2016
Threads
1
Messages
7
Location
Atlanta
I've been lurking for close to 2 years now and finally decided it was time to join. My name is Jay and live in Atlanta. After years of wanting an 80 I finally pulled the trigger and bought one back in November. Drove to Savannah and picked up a 97 LX450. It was stock except for a "custom built front bumper" and a mess of a stereo/video system. After having a front brake caliper come completely off on the trip back, I finally have my 80. With the help of this forum I'm slowly addressing issues with the truck as they come up. I haven't run into a problem yet that hasn't been addressed here already. The wealth of knowledge here is amazing. Anyway, just wanted to say hi and I'll try and contribute where I can.
 
Congrats on your 80, and welcome to the family.
 
Welcome welcome!!! :flipoff2::flipoff2:
 
Welcome and let us see your rig. It's all about the visual stimuli here! :)
 
Glad you survived the trip home.:doh: I'd go over that truck carefully, considering the AV system and !whoops!:confused: that caliper. Sounds like some dodgy work under previous management. Once that peace of mind is obtained, you know from watching that you have a great truck in your hands.
 
Thanks for all the warm welcomes.
Glad you survived the trip home.:doh: I'd go over that truck carefully, considering the AV system and !whoops!:confused: that caliper. Sounds like some dodgy work under previous management. Once that peace of mind is obtained, you know from watching that you have a great truck in your hands.

The caliper was replaced by the small car dealer I bought the truck from. Luckily that was the only thing they touched on it! When the caliper came off it sheared the ABS sensor and brake line off, then ripped the backing plate off and crushed it inside the wheel like a beer can....which locked the wheel up. A tow and $15 dollars later and I was back on the road. As much of a rats nest as the AV system was they luckily didn't cut any of the factory wiring.

Below are the only pics I have right now. Only thing I've done so far on the exterior is replace the 275/60/16s with some 295/75/16 Grabber AT2s and remove the broken power antenna and replace it with a fixed one(not in the pictures).

IMG_1969.webp
IMG_1968.webp
 
Back
Top Bottom