Locker issues

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 1, 2005
Threads
54
Messages
252
Location
Clemmons, NC
Went up in the mountains in my 94 today to help my buddy recover his stuck truck. Got up there in the two feet of snow on the road, pulled him out. I then got stuck myself, time for the lockers. Shifted into neutral, into low, locked the rear. Light was blinking for about a minute. Spun the tires a little bit, light went solid. Locked the front and rear in and both lights came on solid. Got unstuck and back on track, and turn the switch to the off position. Front locker disengaged, rear did not. I shifted out of low, into high with CDL now off. Rear diff lock light was still solid. Went back into low a couple of times, turning the diff lock switch on and off, finally the rear locker disengaged. Is this something I should worry about? Is there any way I can stop this from happening again. I plan to complete the 7 pin mod very soon. Thanks guys! :beer:
 
The fact that your locker did engage and eventually disengaged means that your actuator is working. The fact that the rear locker stuck is probably due to lack of use. You may want to think about locking your diffs front and rear regularly to keep everything nice and loose. I lock mine when I fill up with fuel.
 
The fact that your locker did engage and eventually disengaged means that your actuator is working. The fact that the rear locker stuck is probably due to lack of use. You may want to think about locking your diffs front and rear regularly to keep everything nice and loose. I lock mine when I fill up with fuel.

That's a good idea. I have to fill up tonight, will give it another go! Without the CDL on it's bad to drive in high with the rear locked right?
 
Is it possible it was just the light that stayed on, rather than the locker?
 
So when these things are working properly, if the drivetrain is unloaded and you switch the diff locks on, how long should it take to engage? Do they need some rolling movement? Or will they engage while you sit there pretty quickly?
 
the rear can be a little finicky going in and out. Going in the collar needs to line up so it will slide together with the mating piece and going out there needs to be little resistance for them to slip apart. As long as there is some tension on the rear axle it tends to stay locked until that is relieved.

So in both cases some maneuvering to help line things up or relieve the tension helps it to move more freely.
 
X2, me thinks its in a bine....binD???

some people seem to think or say "its not in a bind!" when in reality it seems it takes very little to almost nothing to actually be in a bind....a.k.a, seat-o-de-pants dont work here :p


unlock it find you a secluded straight path and drive sawing the wheel (weaving) the side to side, the over run, = to, then under run should fix you up.
 
Locking and un-locking seems to work better when you get the hang of it.

As said earlier locking is about getting things in alignment.
So easy does it forward with a little weaving, untill everything is nice and locked and then you can give it some power.

Unlocking is about releasing strain, weaving, forward and reverse often works wonders.

Getting the hang of it means using them.

I don't use them every refuel, but do each time it gets maintenance.
 
h

awhile back same thing happen to me and i manage to get my rear unlock today my rear locker is now lock and can't get it unlock i try every thing is there a way to manually unlock the rear locker also what seem to be the problem a sticky electric diff lock actuator? thats what i had in mind
 
Back
Top Bottom