Least difficult V8 conversion??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I have the ranger. I love it. Yeah at the time I got it it was $1500 but in my opinion well worth it.. Noisy well yeah but no more than the cruiser is already. I also get pretty decent mileage as well (when my foot is out of it that is :) )
 
I did a FJ60 350TBI/700R4 conversion myself and, while it was a huge job, had no regrets. You will love the extra power. I used the ENTIRE GM setup from a '92 pickup: Serpentine belt, GM alternator, power steering pump, AC compressor and computer. YES it took a lot of work, but I was tired of the hippies in VW buses passing ME on the hills. Add (at least) 100 HP and remove 300 pounds and whattaya got? Vroom vroom. Good luck and ENJOY. HTH, H.
 
I did a 350 Conversion with an NV4500 and stock 3 speed transfer case. It's been a huge undertaking, but well worth it. We haven't gotten to the point of a running motor yet becasue the body is still being finished (will be painted today).

IMHO, the most challenging part of the project was getting the motor and transmission/transfer case to fit. Mine fit, but we had to do a lot of extra fabrication. It's very important for correct motor-mount placement becasue of the cooling considerations. Make sure you get the front motor-mounts offset right and the placement of the motor-mounts in relation to the radiator.

I put the GM peformance part serpertine kit in with the stock radiator and a shroud from BTB (runing a motor driven fan) and everything fits perfect. It was luck that we got it right on the first try but a real pain in the arce and a tremendous amount of work.

My only suggestion is hire a professional to take care of the welding and motor placement. You only have one time to get it right for reasssembally. Correct placement will make the final assembally forgiving.

The conversion can be done, but remember it's going to cost a lot more than what you'll imagine. It's the little s*** that starts to cost bucks. However, once you have it done, you'll never look back.

I'll post pics tonight.
 
Not sure if this interests you, but I have a complete marks kit, clutch, headers that I am getting ready to sell, or try too. It is still in the truck running, it was a 3 spd tranny/tcase, not sure if they are the same or not. I am replacing it with a NV4500, only reason I am getting rid of it. If interested email me, jim.rishel@gmail.com. Located in Haslet TX.
 
Price and time frame when it will be avaliable?

Not sure if this interests you, but I have a complete marks kit, clutch, headers that I am getting ready to sell, or try too. It is still in the truck running, it was a 3 spd tranny/tcase, not sure if they are the same or not. I am replacing it with a NV4500, only reason I am getting rid of it. If interested email me, jim.rishel@gmail.com. Located in Haslet TX.
 
Sorry to hijack the thread....Actually I just got the truck from my dad over the holidays and willing to get it out if someone wants it. I really want to put in the NV4500 and see what that is like.
Jim
 
Back
Top Bottom