Knuckle Trouble?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 24, 2008
Threads
12
Messages
71
Location
Nashville TN
I am experiencing some popping sounds on the drivers side. I am thinking it is something to do with the knuckles. It only pops when turning the vehicle under stress. I did some easy off-roading the other day heard the pop. Once back on the road my alignment was out of whack pulling to the left. I was looking at this Knuckle bearing kit from MAF. Is this what I need and is this a job I can complete in a weekend?

http://www.man-a-fre.com/parts_accessories/parts_pictures/sbkl2wbkkit.jpg
 
Any ideas?

I am experiencing some popping sounds on the drivers side. I am thinking it is something to do with the knuckles. It only pops when turning the vehicle under stress. I did some easy off-roading the other day heard the pop. Once back on the road my alignment was out of whack pulling to the left. I was looking at this Knuckle bearing kit from MAF. Is this what I need and is this a job I can complete in a weekend?

http://www.man-a-fre.com/parts_accessories/parts_pictures/sbkl2wbkkit.jpg

Any ideas gents?
 
There's an enormous amount of information on your issue in both the frequently asked questions and using the search function. In short, there are a number of sources for what you will need (which depends on the severity of the problem), but I have had good luck with Cruiserdan on this forum supplying my parts, even though he is a cranky elderly person who does not let me curse in the hunting and fishing forum because that's not how Truman did it.

Good luck.
 
There's an enormous amount of information on your issue in both the frequently asked questions and using the search function. In short, there are a number of sources for what you will need (which depends on the severity of the problem), but I have had good luck with Cruiserdan on this forum supplying my parts, even though he is a cranky elderly person who does not let me curse in the hunting and fishing forum because that's not how Truman did it.

Good luck.

Thank you, still trying to figure things out new to the forum thing. From what I've read Cruiserdan is the man. I will try a search and look around.

Thanks again...
 
If you have a sudden change in the steering angle and no big impact to account for it, PLUS knuckle sounds you need to immediately stop driving the truck and check something. On the bottom of both front steering knuckles are 4 huge studs and bolts which sometimes come loose if they're not properly tightened along the way. Check these immediately before driving this vehicle.

Your discription of mild offroading and now a steering issue doesn't make sense unless something has worked loose. Check everything while you're under there, of course but focus on these bolts immediately.

DougM
 
If you have a sudden change in the steering angle and no big impact to account for it, PLUS knuckle sounds you need to immediately stop driving the truck and check something. On the bottom of both front steering knuckles are 4 huge studs and bolts which sometimes come loose if they're not properly tightened along the way. Check these immediately before driving this vehicle.

Your discription of mild offroading and now a steering issue doesn't make sense unless something has worked loose. Check everything while you're under there, of course but focus on these bolts immediately.

DougM

Doug's absolutely right. I made the mistake of not carefully reading your post.
 
Sounds like you might be due for a front axle rebuild, but impossible to fully diagnose w/ the given info. Also check the steering arm bolts on the bottom of the knuckle and all other linkages as something sounds off. That does look like the kit you would need for an axle rebuild. Add a sig line w/ your vehicle description and try to be as specific as possible about the problem; was it in certain conditions and not others, were you locked, etc. Of course check out the FAQ at the top of the 80s page and search clicking birfield in the 80s tech.

oh and welcome :flipoff2:

btw i ordered that kit and all other associated parts last week and more from our friendly parts shaman at 1-800-432-6668 (american toyota vendor link above)
 
Doug's absolutely right. I made the mistake of not carefully reading your post.

Sounds like you might be due for a front axle rebuild, but impossible to fully diagnose w/ the given info. Also check the steering arm bolts on the bottom of the knuckle and all other linkages as something sounds off. That does look like the kit you would need for an axle rebuild. Add a sig line w/ your vehicle description and try to be as specific as possible about the problem; was it in certain conditions and not others, were you locked, etc. Of course check out the FAQ at the top of the 80s page and search clicking birfield in the 80s tech.

oh and welcome :flipoff2:



btw i ordered that kit and all other associated parts last week and more from our friendly parts shaman at 1-800-432-6668 (american toyota vendor link above)

Okay guys I checked all the bolts and linkage everything seems to be tight. PS gear box is leaking though could this be the source? As well as be the cause of the pulling to the left? The vehicle was lock when it occurred and it only happens when there is stress on the steering system locked or not. The truck has just under 330000k so I am sure there are going to be issues. But it runs strong.

Thank you...
 
<snip>........even though he is a cranky elderly person who does not let me curse in the hunting and fishing forum because that's not how Truman did it.

Good luck.



:flipoff2:


:hillbilly:
 
The pre-93 models also are known for stripping the drive plate where the stub axle comes through it under your grease cap. That can make a clicky sound and if the left side is slipping while you drive around (too much other noise to hear at speed) would indeed cause the vehicle to pull left as the right wheel will keep pulling.

Or you have a blown left birfield (unlikely).
 
Is this what I need and is this a job I can complete in a weekend?

If you have experience doing wheel bearings and brakes on a vehicle then a front axle service should be doable in a 2-day weekend. Get started early on Saturday morning and see where you are by the end of the day. More experience will result in a quicker job; less experience might make this a 3-day job.... or if you work at a snails pace like I do, then plan for 3 days.

There is a section in the 80-Series FAQ with dozens of tips and pictures on how to complete this service. Familiarize yourself with this ahead of time so you will know all the tools, supplies, grease, and parts you will want on-hand before you start.

Buy another roll of shop towels and 1 more can of brake cleaner. Trust me. :D

-B-
 
Thanks guys for all the help I will study up in the FAQ section. I am not going to have the time to get to this till next month. Gives me time to get together all the stuff i will need. Looks like my PS gear box is shot as well. Going to be a learning experience but hay that's the fun part. Get to spend a weekend in the garage!! Sure I will have more ?'s until then. Again thanks all for the info.

Cheers
 
More experience will result in a quicker job; less experience might make this a 3-day job.... or if you work at a snails pace like I do, then plan for 3 days.

Buy another roll of shop towels and 1 more can of brake cleaner. Trust me. :D

-B-

Thank you sir I will plan on 3 days then as I have never done this before. Lots of shop towels and break cleaner. Messy job I take it!!

:cheers:
 
Back
Top Bottom