Key set

[876 Cruisers]

Hey all,

Currently my 92 fj80 has different locks or the key doesn't work in all doors.

I was doing some research and found that the JDM locks use a different type of key to the USDM. I'm wondering if I buy a complete USDM set if they will work.

Sounds like a stupid question but just need confirmation before spending them big bucks

Thanks
Dan

 

[ToyotaMatt]

Hey all,

Currently my 92 fj80 has different locks or the key doesn't work in all doors.

I was doing some research and found that the JDM locks use a different type of key to the USDM. I'm wondering if I buy a complete USDM set if they will work.

Sounds like a stupid question but just need confirmation before spending them big bucks

Thanks
Dan

well well well ?


is your 921 FJ80 a USA spec . ?

or

a NON-USA Spec. ?


this remains un-clear to me after reading your introduction above .....


please clarify if u can ?


thanks

matt

​

 

[876 Cruisers]

well well well ?


is your 921 FJ80 a USA spec . ?

or

a NON-USA Spec. ?


this remains un-clear to me after reading your introduction above .....


please clarify if u can ?


thanks

matt

View attachment 2958483






View attachment 2958484




​

Sorry, it's a non- USA spec from Japan. Key looks like this

 

[876 Cruisers]

This

 

[ToyotaMatt]

This

View attachment 2958509

if you PM me your FRAME # and your MODLE ID code

both on your engine bay data ID plate

or simply PM me a clear up close photo

i will dig a bit and go over what options i come up with

and there are indeed options on the table out there to be clear


thanks matt

 

[gummycarbs]

I'm wondering if I buy a complete USDM set if they will work.

The US lock set is no longer available.

I believe that someone found a Toyota lock set for non-US models that's still available. IIRC, the rear lock was for the swing-open back rather than the lift-up-back. Might be 69005-60340.

Full Set keys and locks - Overseas version?

After thieve ravaged my 1991 80 I'm looking for a full lock set and this is currently on Ebay: Toyota Land Cruiser FJ80 FZJ80 HZJ80 OEM Ignition Cylinder Door Lock Keys SET | eBay - https://www.ebay.com/itm/353220789720 PN: 69005-60340 The last thing I want to do is spend this much money and...

forum.ih8mud.com

Wanted - Lock Cylinder Set (Part #69005-60330) - 1996 Toyota Land Cruiser

forum.ih8mud.com

 

[876 Cruisers]

I see lock set 69005-60340 available still.
Not sure which model that fits

Dan

 

[876 Cruisers]

What may just have to happen is a different key for the back

 

[876 Cruisers]

I have even found an aftermarket set on ebay that does the ignition and both front doors but not the back door

 

[Carey322]

ToyotaMatt set me up with keys and one lock cylinder. Keys and lock cylinder work great.

Also, Delta does a us spec ignition and front door set. Not sure that will work with a JDM Land Cruiser?

Delta Vehicle Systems - Toyota OEM Lock Cylinder SET

Full lockset is no longer available, get the second best thing right here!

www.deltavs.com

 

[876 Cruisers]

I think it should work as long as the barrels are same size. Maybe just the internals were different?

My driver door lock isn't the same key as the rest of doors and ignition. Gonna check with my local key shop to see if they can reconfigure the key barrel to match the set.

They have done it for a key barrel on my fzj70.

Dan