Jack points for bumper jack?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 13, 2006
Threads
114
Messages
634
Location
West of the Pecos
Okay, this might sound like a bonehead question but... On a stock FJ80 (NO ARB or custom rear bumper), where would a guy place a hi-lift jack?

I just did my birfs using a floor jack and it made me think about where I would place a bumper jack if I had one so I looked around a little. Maybe I'm missing something, but neither the front nor rear bumper looks solid enough to use a hi-lift jack without tearing something up.

Am I out of luck with a hi-lift until I get around to putting on custom bumpers? If that's the case, what's another alternative for an "expedition" type jack that I can throw in the back of the truck?
 
The stock "bumpers" are plastic covers. If you have to lift up a stuck, stock 80 you are just out of luck. If you have a 2 inch receiver you may be able to use that in the back.

This is one of the main reasons folks go aftermarket on the bumpers. And sliders give you jack points on the side....

John Davies
Spokane WA
 
I won one of these in a raffle. Haven't ever tried it. From HiLift and supposedly works for regular oem bumpers. I imagine it damaging the bumper. Somebody want to try it and let me know if it rips the crap outta the bumper? :D
ph_bumperlift_large.jpg
 
I find the factory jack an excellent tool for trail stucks. It can push up, down and sideways. It's safely secured out of the way when not neede, and it's always there. Toss in a few thick chunks of wood for trail use and there's almost always a way to get a bottle jack like this under the frame or axle to lift. On a trail there are also various rocks, logs and branches to use for repeat lifting (lift, block with a rock, reset the jack and repeat) and you can also lift to the jack's limit and push the truck over to move it around. Yes there are things (many) a hi-lift will do but don't discount the factory jack for sheer versatility and tremendous functionality.

DougM
 
Umm, the rear "bumper" in the center where the aluminum treadplate is the rear crossmember of the frame. I would think this would be an excellent locale to use the hi-lift jack. Also, you should be able to use the hi-lift in the front w/ minimal damage if you locate it directly under the frame horns. I wouldn't do to this to rotate my tires, but if you are really in a jamb, it should work.

Ary
 
If you have to lift up a stuck, stock 80 you are just out of luck. If you have a 2 inch receiver you may be able to use that in the back.

I've used a 4 hole, bumper bolt on receiver as a hi-lift jack point to lift the rear-end when stuck in deep snow. Lift, push sideways, and drop - repeat until back on the trail and pointed in the right direction. A bit scarey, but quick and effective. A tow strap placed in a pile under the hi-lift base spreads the load to keep on top of the snow.

-Steve
 
It is possible to use the Hi-Lift Lift Mate and attach it to the front tow hook. By the time the front wheel is off the ground the jack is almost fully extended, which is rather dangerous. On a flat concrete surface I felt weary doing this, so I would hesitate to do it off-road. If you strapped the axle to the frame to prevent the suspension from extending it would probably be safer.

The Lift Mate was designed to hook to the wheels, which works pretty well. No good for changing a tire, but it works for lifting the wheel if it has sunk into sand/mud.
HPIM2513.webp
 
Here is the Hi Lift Lift Mate as it was designed to be used.

Yeah...I thought you would lift from the top half of the wheel. That way the tounge rests agains the side of the wheel. You are relying on your parking brake keeping the wheel locked. If the brake isn't set the wheel will spin around and the truck will drop. I had one of those lift mates and I ended up selling it. It wouldn't work with my drum rear brakes (FJ60).
 
Good point . Attaching at the lower half of the wheel gives you about 6" more of jack extension, but I hadn't thought about the wheel rotating. If the transmission is in park, the center diff is locked, and the parking brake engaged, is that sufficient to keep the wheel from rotating?
 
Back
Top Bottom