It's getting hot. Charge your AC.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 11, 2005
Threads
126
Messages
3,326
Location
Alabama
I charged mine yesterday after work. Added about a pound. It went from barely being tolerable with the AC on recirculate and fan on high, to freezing my balls off on low. $20 well spent.
 
I took it to my guy. He used one of these(different brand, though):

ac7000.jpg
 
Think its time for mine to be recharged also, what does it run to have done vs. easy to diy?
 
Anyone use Freeze 12 on an 93 R12 setup?

Mine isn't turning the compressor on, so it sounds like it's low. It has dye in the system and I looked with a black light at lunch and didn't see any leaks.

thoughts on just putting freeze 12 in to top it off?
 
all of $10 and 5 mins if you do your 134 yourself... (+ a $10 filler gauge tool good for ever)
 
Just to make sure you guys are tracking...if its "low" there is a leak, it doesn't just run out. Not saying that an evac and recharge wont help for awhile, or even a long while. Just know that it will leak again.

FWIW if you do have R12 (I did) and there is a leak or your compressor is not engaging due to low refrigerant pressure. You might think about converting to 134 when you get the leak fixed. I did it last year and I have loved the switch. To do it right you need some new parts (dryer, and expansion valve) and ester oil. its mostly doable at home.
 
Just to make sure you guys are tracking...if its "low" there is a leak, it doesn't just run out. Not saying that an evac and recharge wont help for awhile, or even a long while. Just know that it will leak again.

FWIW if you do have R12 (I did) and there is a leak or your compressor is not engaging due to low refrigerant pressure. You might think about converting to 134 when you get the leak fixed. I did it last year and I have loved the switch. To do it right you need some new parts (dryer, and expansion valve) and ester oil. its mostly doable at home.

Yeah, I'm thinking about that too. I was just hoping that since they put dye in the system, I'd able to trace it. I can see it in the sight glass, (some traces of dye) but no leaks anywhere else...hmmm
 
I have read very little about it, but it says you can. I have no personal experience with it.
 
To do it right you need some new parts (dryer, and expansion valve) and ester oil. its mostly doable at home.

Not all true, some of it is.

A drier is not a must, but they are cheap so why not. The rule of thumb is to change the drier if you leave the system open for sometime, if the compressor blew chunks, or you want to change types of oil in the system. The expansion valve only needs to be changed if it is damaged, aka clogged. To really do it right, you need to, aw screw it. The most important thing to remember is that 134a runs at a higher pressure than R12, so generally you will fill to about 80% of the capacity or recommendation for R12. This is true for all vehicles.

I swapped to 134a last year (not doing a/c at the time, not costing but $20) and it blows out a popsicle every traffic light.

If you need or want a/c help, it's now my summer job. Let me know, or stop by.
 
Back
Top Bottom