Is this birf toast?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 14, 2008
Threads
1
Messages
2
First time posting here and I got a bit of a question.

So I am helping a buddy with his birf and I need to know is this one reusable?

All we are looking to do is can we put this back in if he is going to trade it in soon? Does anything ride on the area that is warn?

Thanks for the Help.
IMG_2680.webp
IMG_2681.webp
IMG_2682.webp
 
The damaged area rides in the spindle bushing, which I have no doubt is also trashed.

DougM
 
The damaged area rides in the spindle bushing, which I have no doubt is also trashed.

DougM

Which also means that the spindle is probably not aligned properly with the axle housing, or the wheel and trunion bearings are shot.

Put it all back together and trade that sucker in soon, otherwise your buddy should consider a full axle service if he decides to keep the truck long term.
 
Trashed CV

The damaged area rides in the spindle bushing, which I have no doubt is also trashed.

DougM

Not so! The shiny part right next to the CV bell is the bit that rides in the spindle bush. The damaged part of that CV runs inside the outboard end of the spindle under where the locknuts and outboard bearing run.
Still it looks a bit trashed and I would be looking at the condition of the inside of the spindle as well.


Cheers

Hedley
 
Back
Top Bottom