Introducing project Mudhorn (was Peesoschett)!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 19, 2008
Threads
268
Messages
3,831
Location
San Diego
Website
www.phalconoverland.com
Hello all. Let me just say that it is great to once again be back in the 60 series community. After rolling my beloved 60 at the Turf & Surf a few years back, an act for which I will regret until I leave this Earth, I had to take some time to heal emotionally. I did that by building a nicely equipped 80 and taking it on lots of trips. However, as much as the power, power windows, power, power sunroof, and more power are really nice, it lacks some of that raw panache that an old school war wagon like a 60 has in spades. In addition, my kiddos really missed the 60. It was their first truck and they had so many fun memories in it. With a fleet of vehicles that seem to just work everyday, I finally decided that maybe it was time for a project.- something on which I could teach my kids to wrench, drive stick someday, basically a truck that needs me/us... something that in the end exists for the shear joy of building and adventures to which it will lead. This was to be something that didn't have a timeline or long list of expectations, it was about the journey and end product would be what it would be. It was about spending time with my boys tinkering on something we love. This BTW, is a lot easier when you already have a 4X4.

Fast forward and in a random conversation it comes up that there is this 60 nearby that was a project that had lost its steam. It had a newer engine installed but many of its engine parts were in the back. It had body damage, some rust, basically it was beat and needed love. Perfect!!! I approached my wife about acquiring it but we were about to move and she nearly cut out my heart at the thought of taking on a project. Plus, it was pretty ugly. Fast forward some more, we moved, I made and offer, it came home. My oldest was thrilled beyond words and swears it will be his first car someday. Hopefully it well. My wife thinks it is hideous.

So, enough of my blabbing, lets get look at this beauty queen!

Dig that 2 tone! Schett's a real looker!

20190913_164053.webp


... but Schett has an owie.

20190913_164102.webp


Styling rear bumper! And, a random hole in the tailgate with wires already to power...something.

20190913_164027.webp


Sliders, they are excellent for protecting your body from rock damage. Unfortunately in this case, Schett's body needed protecting from the sliders. In all actuality, the body was probably rusted anyway. At least the sliders appear to be insanely strong. I plan to modify the front portions so I can fully attach a front fender.

20190913_164123.webp


And, last but not least, a whole load of parts including a very interesting front bumper!
20190913_164308.webp



This build will not move quickly, that is assured. But I will update as I go and share anything fun or interesting stories that come of it.

In the end, let's hope Peesoschett is one less 60 that sees a junkyard for a very long time.

Frank
 
I figured it is time for an update. Much has happened since I last posted. My youngest learned to say words, the Mandalorian came out, and best of all Mudhorn PASSED SMOG TODAY!!!

There have been ups and downs.

For some reason my wife didn't find it so adorable when our totally adorable toddler started saying Peesoschett in the most adorable way possible which did I mention was totally adorable? So my 8 year old after helping me work on it one day (he is determined it be his first car...) suggested Mudhorn because it is big and brown and we had just watched that episode of the Mandalorian. Well that stuck so that is the new name. It beat out Gasquatch which admittedly was the nickname of my last 60.

Challenges were many. i had constant and repeated carb jet clogging. I had to pull the manifolds off and fix leaks. The air rail came apart during disassembly and you how hard they are to find. I broke a few of the vacuum connectors for good measure. I have replaced almost every vacuum line. That rubber mount to which the radiator lower metal pipe attaches came apart and then the whole hose came off while sitting there turned off and purged itself of coolant in my buddy's driveway. I have poured over and over the FSM to the point I actually get this thing. I mean I could literally program a controller to take care of all of this stuff if CA would allow it. I have corrected tons of wiring issues. I have an exhaust leak that is at the manifold junction and will likely require me to just find a new manifold set to fix as 3 of the 5 joining holes were mostly stripped. The front diff is in bad shape and the knuckles hemorrhage.

On the upside, a good friend gave me his old seats so I could remove these wannabe performance seats that try to separate your nads when you enter/exit the truck so it now has stock seats. Me with that friend and another went in on a parts 60 that has his soon to be engine / trans V8 swap and the gears I need for mine. I am also going to get his H55F and all the fixin's in the deal so in a month or so Mudhorn will be regeard and 5 speeded. I lucked out finding similar color spare fenders and tail gates so the major body damage is fixed.

Best of all, be it the new exhaust, DUI distributor, or both, this 2F pulls strong well past 2500 RPM. It's more in 3FE territory asking to shift around 3500 RPM. So, it's still a 60 but not has slow as at least my old one was when it had the 2F.

It still needs little things like carpet, AC, the blower fan to work on all settings, maybe a stereo, HAM, etc... upgraded steering linkages, on board air, sliders and rear bumper.... rust repair... window crank handles, new springs/shocks, lots of other little stuff, you know the drill. On the subject of sliders I tried to keep the original with new fenders without cutting the bottom off of the fenders but that is not going to work due to the location of the most forward mount. The way the sliders are picture framed has the rockers all cut up/slotted around the mounts and in contact with the sliders all over the place (lots of noise transmitted to the body...) so I am going to ditch them, patch up the rockers as best I can, and go with some different sliders.

You are probably wondering after this long post, where are the pictures of this sexy beast? Well I promise to get some this weekend. I have been so busy wrenching I just never got to taking pictures other than of vacuum line locations so I could easily reassemble.


Frank
 
Absolutely!
 
I look forward to pics! Sounds like a great father and son project. I hope some day my kids will want my 60.
 
Alright, as promised, some progress pics...

Many little things have been done, the heater fan now works on all settings, the driver's window goes up all the way, broken window cranks were replaced...

I still need to remove the rear bumper and cut off the sliders but she is running quite well.

1582589590419.webp


That front end damage is now repaired with new headlights. My friend's diesel swapped 60 is in the back ground. That thing is sweet.

1582589676150.webp


1582589725609.webp


Next on the list is to rebuild the carb. The pedal sticks, one of the dust covers disintegrated, and it hesitates every now and again. However, for those that know I15 between Fallbrook and Escondido, she pulled all of the hills around 70 MPH which is not bad at all for a 2effed 60.

I also ordered new rear shoulder belts to replace those in there. One doesn't lock and one is almost impossible to unlock. I also have a front bumper + winch ready to be installed.

There are still a zillion things to do like carpet, stereo, comms, the list goes one...

Frank

1582589673258.webp
 
It's been a while since I updated but some progress has been made.

I got the winch/bumper installed. One of our club members built the bumper and did a really good job. He built a newer one so I picked up his old bumper. I still need to wire up but progress is progress.

1584500836280.webp


I thought I'd have some fun with badging while finding a battery battery hold down solution vs. the ratchet strap I had been using. I bought some M8 threaded rod off of Amazon and am using it to hold the battery tray down by threading it into the rear mount with some jam nuts. I am then also using the same rod for the hold down strap I 3D printed... It's .5" of ABS so very strong. If anyone is interested I would be up to make some more for a minimal cost.

1584500996981.webp


This is the previous version but you get the idea...

1584501226721.webp


I still have some tuning to do to get that surface finish dialed it but each print is getting better.

1584501294823.webp


1584501325765.webp


This 2F just purrs at idle. I probably need to adjust valves and go through the timing and idle settings one more time but the truck really runs well.

Next weekend I am hoping to swap axles from the donor 60 I went in on with some friends. It has 4.56's which should help with the massive 20% or so over gearing I am dealing with now. That both of Mudhorn's diffs have bad pinion bearings makes the swap all the more desirable.

Frank
 
Awesome progress! Looks like a great adventure to share with your kids.
 
Once again I have neglected to update...

Let's start with the interior or lack thereof when we started. We removed the seats and panels and went to town adding sound deadening material. My dad pitched in and called upon his NJ skills to patch rust.

1603685584619.webp

1603685623604.webp


I needed a radio mount so designed one and 3D printed it. It took a few iterations but turned out sweet!

1603685747003.webp

1603685776379.webp


1603685626832.webp
 
With new carpet, the Noico, new speakers, some added insulation, and new Smittybilt front seats the truck is quiet, and has a great sound system. The sub turned out to be faulty so am replacing it but even without it the stereo sounds really good.

1603685925348.webp


I swapped axles with a parts 60 I bought with a couple of friends. That gave me 4.56's and Detoits front and rear. However, the brakes were shot and death wobble was terrible. I bought an 80 series steering kit, trimmed the tie rod, added the 60 p-side end, rebuilt the knuckles, and added loaded calipers with new rotors. I went from horrendous death wobble to totally solid steering. I am not crazy about the Detroit but it sure does work.
1603686180138.webp


1603686207976.webp


1603686238146.webp


I would be remiss if I didn't mention the new Alcan springs and Doetsch 8000 series shocks. I shifted the BFG's to a different project and am running Kenda Klever 35X10.5s. While they ride stiffer, the steering effort is less and they clear much better.
 
I have done some other more minor things like seal the steering gear and remove the rear bumper. The home grown brackets collided severely with the rear tires.

Next up is to replace the carb. I have good idle, good vacuum, and good full pedal response but that pesky hesitation at partial throttle. I have cleaned this carb, swapped fuel filters, cleaned out the fuel lines, etc.... multiple times so am biting the bullet and just replacing this rusty mess with a newer carb.

I have a rear bumper on order and need to remove the sliders so I can figure out how I am going to repair the rockers. Sadly, while the sliders protect from rocks, the rockers are butchered kind of defeating the purpose of the sliders. Thereafter I will get new sliders.

The truck needs the entire AC system replaced but that can wait a few months.

Frank
 
Haven't seen anything about the motor, but I assume it's smogged? If it is, I'd have to say the part throttle hesitation might not be the carb at all, could be one of the many smog items rearing its ugly head.

If its...quietly desmogged, have you gotten a good vac reading? Either way I'd be curious, most of the hesitations weren't usually carb related, usually one of the vac components.

Clean up is coming along well and nice to see someone local as well
 
So yes it did pass smog, very well in fact. I can check vacuum again but it was good and I sprayed for leaks but found none. I have had the main jets clog about 6-8X now. I dipped the carb and replaced the accel pump and other parts but just cannot get that hesitation to go away. The carb is rusty and spend a long time empty.

Frank
 
Back
Top Bottom