Interior rattles.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 3, 2018
Threads
24
Messages
403
Location
Memphis
Website
128keaton.com
Hey folks. Just curious. How many of you guys have interior rattles?

I have a couple, the most annoying one seems to center around the Lexus Night View dome on top of the dash. Makes me want to cancel it, but it is a very neat feature and extremely useful on darker highways at night.

The second is, I believe, the cup holders or the latch itself on the center console.

Anyone else have anything similar? Remedies? Was thinking about tearing into the dash at some point, but I worry I'd introduce more rattles.
 
I had many plastic-on-plastic interior creaks depending on the outside temperature. Many more would appear when it's cold and parts shrink a bit and previously tight joints loosen up a bit.

Gradually I've found most of them. When I find a joint that creaks I usually stick some felt tape on one of the parts. I use this stuff, it's designed for auto wiring harnesses: https://www.amazon.com/gp/product/B00XPBB6L8/?tag=ihco-20

BTW, the most persistent creak I had was where the shifter console meets the bottom of the ashtray trim.
 
I had many plastic-on-plastic interior creaks depending on the outside temperature. Many more would appear when it's cold and parts shrink a bit and previously tight joints loosen up a bit.

Gradually I've found most of them. When I find a joint that creaks I usually stick some felt tape on one of the parts. I use this stuff, it's designed for auto wiring harnesses: https://www.amazon.com/gp/product/B00XPBB6L8/?tag=ihco-20

BTW, the most persistent creak I had was where the shifter console meets the bottom of the ashtray trim.
Yup. I have that one too. There is already a plethora of similar type tape covering certain areas, presumably done in the factory. Thanks for the link.

One thing that I cannot wrap my head around is how Toyota installed the Night View Dome. It is a plastic piece situated on top of the dash. No gasket in between on mine at least.
 
Yup. I have that one too. There is already a plethora of similar type tape covering certain areas, presumably done in the factory. Thanks for the link.

One thing that I cannot wrap my head around is how Toyota installed the Night View Dome. It is a plastic piece situated on top of the dash. No gasket in between on mine at least.
It's probably installed right after the heater core, but before the steering rack. :)
 
The loudest rattle/noises I have are leather squeaking against leather. Especially between the two back seats. I have cleaned and conditioned them and it still drives me crazy.
 
I think @Manhattan summed it up best when he said his truck creaks like a 100 year old pirate ship.

Mine got a lot better when I pulled the third row and added felt tape to insulate the center console and driver's door panel.
 
My night view was extremely annoying and one of the first things I took out. (Didnt have the proper windshield for a proper display) still trying to make the perfect template to cover the hole....
 
Hey folks. Just curious. How many of you guys have interior rattles?

I have a couple, the most annoying one seems to center around the Lexus Night View dome on top of the dash. Makes me want to cancel it, but it is a very neat feature and extremely useful on darker highways at night.

The second is, I believe, the cup holders or the latch itself on the center console.

Anyone else have anything similar? Remedies? Was thinking about tearing into the dash at some point, but I worry I'd introduce more rattles.

Tuck the felt in around the dome if possible or use a strip of open-cell foam, like the small ones used for sealing up windows in winter. BTW I like that you're the first person who actually uses and likes the night vision feature, I think its neat!

My console latches were loose and simply tightening up all the screws settled it in.
 
The loudest rattle/noises I have are leather squeaking against leather. Especially between the two back seats. I have cleaned and conditioned them and it still drives me crazy.

Not the most glamorous fix, but I solved that issue by putting a glove between the seat backs on the split between the seats. On my rig they touch closer to the top of the seat back, so I just shoved a glove in there and its worked well for the last couple years
 
Back
Top Bottom