Intake Hose Crack

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

High Temp Gasket Forming Goop

Works great. You can squeeze it right from the tube into the accordian folds and smooth it out real nice. Handles high temps very well. Mine cracked about 90% of the way around, and its been holding tight for more than a year. You should be able to buy a tube for about $3.
 
Use care in your choice of patch materials, this is after the air cleaner, so if anything comes loose it will be sucked into the motor. Debris sucked into the motor can cause damage that is $$$$$ to repair.
 
2 Pi is indeed a full circle (360 degrees). Pi is half a circle (180 degrees). The circumference of a circle is 2*Pi*R. I am a fractional banana guy on this board but I'm pretty confident on this one. :)

Link on radians:
The Radian

Lets think about this for a minute. :)

C = Pi*2R (or you could say C = Pi*D, same difference).

C/(2R) = Pi (Or C/D = Pi)

Pi-unrolled-720.gif


When a circles diameter is 1, the circumferance is Pi.

The ONLY way that Pi is half a circle, is if the radius is exactly 1 (meaning the diameter is 2).

Since the air intake is not exactly 2 (mm, inches, cm, anything) in diameter, then half the circumferance cannot be Pi.

Pi is not variable like degrees are. It would be accurate to state that it is 180*.
 
Lets think about this for a minute. :)

C = Pi*2R (or you could say C = Pi*D, same difference).

C/(2R) = Pi (Or C/D = Pi)

Pi-unrolled-720.gif


When a circles diameter is 1, the circumferance is Pi.

The ONLY way that Pi is half a circle, is if the radius is exactly 1 (meaning the diameter is 2).

Since the air intake is not exactly 2 (mm, inches, cm, anything) in diameter, then half the circumferance cannot be Pi.

Pi is not variable like degrees are. It would be accurate to state that it is 180*.

True dat!
 
If you are talking radians

Well you didn't say you were talking about Pi in radians!

I couldn't decide on the Lemon Merangue or Cherry. :lol:
 
Back
Top Bottom