Installing return line on fuel tank

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 20, 2009
Threads
12
Messages
54
Location
Esperance Western Aus
My Original 1983 FJ45 tank was rusted out, so I purchased an hj47 tank, only issue is my pickup and return from the old tank was completely rusted through, is there an easy way to install a return line on the new tank as it only has a pickup, thanks
 
add a return tube, similar to the gas setup.
the return just went into the tank an inch or so
 
If you want to go direct to the tank you could add a 90 degree bulkhead fitting. If you put it next to the sending unit you would be able to get to the backside nut.
 
Back
Top Bottom