Inline Tube Stainless brake lines

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Lucky1386

Lucky1386

GOLD Star
Joined
May 5, 2019
Threads
16
Messages
311
Location
Bay area
Curious if anyone has any input on this. I am knee deep in rebuilding my 84 60 series. I was going to make my own brake lines as my old ones were all hacked up, but I figured I would check and see if anyone makes any pre fabbed lines. It seems there is only lines for a FJ62 stainless lines , the question I have is can I run these on a 60 series? I know they are on the opposite side of the frame but I am curious if the frame has provisions for these to bolt up, I know I will have some custom work to do at the firewall and possibly the rear but it would be nice to cover the long runs along the frame with this kit. TIA

And here are the lines I already made on the rear housing.
IMG_1312.webp
IMG_1315.webp
 
Last edited:
Don't know about the fitment of 60's vs 62, but...
If you have all the old brake lines to use as templates, bending and flaring new lines is fairly easy. I did an entire BMW 2002 myslef and had never done any before. Not stainless however, just steel. All the parts stores will lend you the tools.
 
NYNick said:
Don't know about the fitment of 60's vs 62, but...
If you have all the old brake lines to use as templates, bending and flaring new lines is fairly easy. I did an entire BMW 2002 myslef and had never done any before. Not stainless however, just steel. All the parts stores will lend you the tools.
Click to expand...
Yeah I'm comfortable making them just trying to save myself some time
 
What do you mean opposite side of the frame? 62 series brake lines run on the "passenger"/right side of the frame - aren't 60 series the same?

Anyways, it likely won't work for your rig. FJ62s have a load sensing proportion valve in the middle of the frame, 60s do not. So none of the brake lines going to the rear will match up.
 
Lead Head said:
What do you mean opposite side of the frame? 62 series brake lines run on the "passenger"/right side of the frame - aren't 60 series the same?

Anyways, it likely won't work for your rig. FJ62s have a load sensing proportion valve in the middle of the frame, 60s do not. So none of the brake lines going to the rear will match up.
Click to expand...

Great to know I just thought from the pics that on inlines website it was on the driver's side. Thank you forthe clarification
 
You must log in or register to reply here.

Share this page

Back
Top Bottom