Identify This Hose?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 21, 2017
Threads
7
Messages
84
Location
Clemson, SC
Found this hose not attached to anything.. Anyone have an idea? I've looked through the FSM and can't find anything.

It's the hose on the right.

IMG_20180726_200708.webp
 
Where does the other end go?
 
Found this hose not attached to anything.. Anyone have an idea? I've looked through the FSM and can't find anything.

It's the hose on the right.

View attachment 1753345


that should be connected o_O


Looks like cooling system maybe & has the same Clamp Memory markings indention

check your coolant level before u start your truck to verify u have some still in engine
 
that should be connected o_O


Looks like cooling system maybe & has the same Clamp Memory markings indention

check your coolant level before u start your truck to verify u have some still in engine

i actually did check that. its pretty damn full. wondering if its like a heater hose bypass maybe?
 
i actually did check that. its pretty damn full. wondering if its like a heater hose bypass maybe?


breather on top or side valve cover maybe

or goes MAF system
 
My guess is that is the original OEM hose that goes between the PHH and the heater control valve and the "PHH hardpipe bypass" has been done and for some reason the original hose and hardpipe was not removed just bent out of the way. A better picture showing more to the right would be more conclusive.
 
i was told that the PHH had been done so I was thinking it had something to do with that. Thanks for the insight guys..
 
Looks like a PHH bypass that kept the original hose and metal tube intact.
 
Back
Top Bottom