IceCo Fridges and Freezers - Next Group Buy August 14th

Joined
Aug 19, 2019
Messages
864
Location
Nc
Hello everyone.

July is around the corner, and Like many of you, I have been on the search for a fridge. Also like many of you, I can’t afford to shell out $1000.

Because of this I have started looking at the smaller names like Alpicool (Costco/costway fridges, also rebranded 100 times), as well as other Chinese names. When it comes to Chinese, most are generic compressors that come with a 1 year warranty. However, the IceCo line of fridges carry the industry standard Danfoss/Secop compressors that are found in big names like ARB, and that carries a 5 year warranty instead of 1. This is a low-power consumption compressor, and the ones I have looked at does have a cut off built in so that it doesn’t drain your battery below the starting voltage.

Even though their prices are very reasonable already, I decided to contact them to inquire about group discounts. After a few emails and phone calls, they agreed to make a 25% off coupon specifically for mud members.

I have a rep from IceCo ready to activate the coupon code (“Ih8mud”) when I ask him to, but I wanted to give everyone a heads up before I have it activated.

Their website is IceCofreezer.com, please take a look and if any of their units interest you, and 25% off is good, then please leave a message here. Once there is enough interest I will call them to activate.

Since this is a coupon code, everyone will be paying IceCo directly and can order as soon as coupon is live, so no need to wait on the group for the discount. If enough of you guys do it, I might earn myself a sponsorship and earn a fridge for myself! I sorta blew through my budget for this month and didn’t leave enough left for a fridge, so this is a good chance to not only get a good deal for yourself, but also a good chance to help me earn my “sample unit”.

I will be posting more information regarding their line of fridges this week, so stay tuned if you are interested. Also, please feel free to ask if you have any questions, as I have done a fair bit on reading up on these fridges. Anything I can’t answer, I will be glad to contact IceCo on your behalf for you.

Thank you everyone for your time! Here is a good review for a start.


IceCo-Group-Buy.png


Don’t forget, dual zones and some of the small GO models are backordered until mid July.
 
Last edited:

cmw

Joined
Nov 20, 2015
Messages
123
Location
Westford, MA
In - was interested in the IceCo previously linked on Walmart.com.

Would be nice to know the dimensions on their slide.
 
Joined
Aug 19, 2019
Messages
864
Location
Nc
Thanks for the interest everyone, and please let me know if you have any questions.

VL slide is the bigger of the two, and dimensions are a few posts down. @cmw


The JP slide dimensions:
24.8 x 15.9 x 2.6

D882ECF3-A337-4430-B2ED-61C479DCB477.png


C89DAC4E-77F7-4147-948C-00077B5798C1.png


4EC61869-ACCE-49B9-97B0-C1E7D7195B0F.png


5C2E4F19-2DAF-41D1-80B7-F894518FDDE7.png
 
Last edited:
Joined
Aug 19, 2019
Messages
864
Location
Nc
Okay everyone.

First off, a BIG THANK YOU for all the interest. You guys are going to help me earn my fridge, and I cannot express enough how much that means to me (and Tiger, my dog who likes his sweet tea cold). I will be sure to share our experience with it via my stream, which I will have you guys largely to thank!

Anyways, everything is in stock except for the Dual Zones, which is backordered until mid-July.

They said the single zone VL60 (didnt see on their site) is available now, and the dual zone in 2 weeks.

I was told price on website includes tax and shipping, so take 25% off that and you will have your total. Shipping is about 2 days for most of the continental US, assuming no delays from the shipping companies. We will see as they are sending me a VL45 to review for you guys!! I also did confirm that every fridge carries the same compressor, including the small ones.
 
Last edited:
Joined
Aug 19, 2019
Messages
864
Location
Nc
So this goes into effect on July 1? Interested in getting a VL60
Thank you for the interest, and We can have it up by then, possibly sooner.

The VL60 comes in a single, as well as dual zone configuration. The single can be shipped out same day, but the dual is on backorder until mid July.

For those interested in the single zones (all but 2 models are single zones), we are working on getting a coupon up tonight or tomorrow so that you can, hopefully, get it for this weekend. I will let you guys know as soon as it is live.
 
Joined
Mar 26, 2009
Messages
497
Location
Frisco, co
 
 
Thank you for the interest, and We can have it up by then, possibly sooner.

The VL60 comes in a single, as well as dual zone configuration. The single can be shipped out same day, but the dual is on backorder until mid July.

For those interested in the single zones (all but 2 models are single zones), we are working on getting a coupon up tonight or tomorrow so that you can, hopefully, get it for this weekend. I will let you guys know as soon as it is live.
Thanks!
 
Joined
Aug 19, 2019
Messages
864
Location
Nc
Yep, just got the official okay from IceCo. Code will be active tonight.

Thanks again everyone!
 
Joined
Feb 26, 2015
Messages
597
Location
423
 
I’m in for a slide. Going to be using it, hopefully, for a fridge I sourced locally. It is a Whynter 65qt single zone. Think it’ll fit?
 
Joined
Aug 19, 2019
Messages
864
Location
Nc
JP slide dimensions
24.8 x 15.9 x 2.6

Whynter 65 Qt dimensions
28 x 21 x 18.25

Seems the Whynter is too long And too wide for the JP slide, I will send them a text to ask them if they make a slide for the chest-style fridges and report back.

A52560E2-429C-45DD-9B1A-8DAAA4E40121.png
 
Last edited:
Joined
Aug 19, 2019
Messages
864
Location
Nc
I’m in for a slide. Going to be using it, hopefully, for a fridge I sourced locally. It is a Whynter 65qt single zone. Think it’ll fit?
There is a VL series slide that I am trying to find dimensions for. Will report back! They make one for up to 74 qts.

FF0B5515-452B-4ACF-9460-396DABC517D1.png
 
Joined
Aug 19, 2019
Messages
864
Location
Nc
I could not find the dimensions on the VL slide itself, so I am basing it on the dimensions of the fridges that will fit on it.

The Whynter 65 qt is 28 inches long, 18.25 inches wide. It will fit, just won’t be exact but close. @bonestock

8DD25B95-C195-45F1-AFD5-81AF892FEBE2.png


8C904AB3-46AB-434E-B47A-96FBC0F207D7.png


D115C1F6-17A2-47B2-9CE3-09F9118EF218.png
 
Last edited:
Joined
Aug 19, 2019
Messages
864
Location
Nc
I updated the posts with dimensions for both the JP and VL slides. Both are priced at $199 so $150 (tax and shipping included) after 25% off. Again, coupon is “Ih8mud” and will be active tonight.

I will keep an eye on it, and let me know if anyone has any questions!

I have to double check, but I think for the models that come with insulating bags, that the bags are included in the price.
 
Joined
Aug 19, 2019
Messages
864
Location
Nc
Any chance this is 25% off the current sale price? Or just retail price?
Are you referring to the current 10% sale price on their website? As far as i know, the discounts will not stack. I believe it is one coupon per checkout.
 
Top Bottom