I want sliders!!!!!

[drohweder]

Who is selling a good bolt on set? Simon at Faultline has a nice set but you have to cut the sheet metal and I really would rather not. Chime in with experience and pics. I want something that will bolt on and take the place of my running boards. bye-bye diamond plate Thanks

 

[orangefj45]

simon makes them in different lengths.
and you can't beat his price either.

 

[paranoid56]

whats there web site?
Shane

 

[orangefj45]

www.faultlinefab.com
new website was contracted out a while ago, but isn't done yet. or you can call him, but he only answers in the afternoons, otherwise leave a message. 909-599-9559 simon

 

[drohweder]

I talked to Simon at the FJ45 run. super cool and his product is top notch. but you do have to cut about 2 inches off the bottom of your rocker panel to mount the sliders. I would rather not do that. His website is there but has no info on the sliders.

 

[skyshark186]

I emailed him and got two prompt responses. Both informative and helpful. I would love to buy some from him, but my 350s pipes come out right there. No way to realistically route them around. I would say if youve got a cutting wheel, decent experience, and steel balls you could do the job well, without repainting for his sweet price of 125 a pair. They look SWEET and I imagine perform just as well.

 

[CruisinGA]

Find a local fab shop that would do it.

I know of several shops in the atlanta area that would make a set-and Atlanta is not exactly a four-wheeling mecca.

 

[66fj40x2]

I've got a set of Faultline Fab sliders and LOVE them. He's great to work with and may be willing to do a longer set to keep from cutt'n the rockers. Call em up. I called and ordered mine unfinished so I could tie'em into a set of tube fenders. He even knocked a little off the price for me.

 

[drohweder]

Yeah, he told me I would need to rework the exhaust using a y-pipe and bring the exhaust out that back. Forgot about that. Guess he could make a longer set, I'll ask.

Dan

 

[drohweder]

Just talked to Simon. No problem keeping the exhaust where it is, mounting sliders won't interfere. He also sells a set that will mount below the sheet metal and require NO CUTTING. He said with the Frame Rail supports there is very little difference. You gain and extra 2 in of clearence and a little more rigidity if you cut and mount high but that is all. Call me lazy but unless a dremel tool counts, I don't have a cut-off wheel to do the job.

I'm getting a few measurements and then am going to email him and put it on the card tonight!!!!

Same price as the others by the way, $125 + $10 shipping.

 

[petescoffee]

I had Simon make mine custon to be similar to the shape of the original step and then put diamond plate on top of them. The sliders came out great. I haven't mounted them yet, hopefully this weekend.

 

[drohweder]

Cool, what did he charge for that diamond plate addition?