I need help identifying this hose

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 28, 2016
Threads
14
Messages
93
Location
muscatine IA
Greetings mud members, I have been slowly restoring my 96 cruiser a little at a time, I have come across this hose that has been removed/cut by the PO, I thought it was an AC line but after reviewing the 96 repair manual (ac/heat section) I could not identify it. I have drove it several times, even had it on a couple longer trips, no heating issues, no performance issues to speak of. Any thoughts? Thanks in advance!

IMAG0011.webp
 
Rear heat?
 
Hmm, no idea.
 
It's about 1-1/4" to 1-1/2" long, attached to the firewall, it's black and has one hose clamp on it. Probably about 19mm diameter.

Hell, even I can see THAT from the picture.
 
I don't think so, it's higher than the evaporator.

Hardline for vacuum booster? Not sure where that runs on the 1FZ
 
It appears to be Jose.

upload_2017-3-10_11-1-16.webp


Possibly a heater hose.
upload_2017-3-10_11-3-7.webp
 
It's the rear heater line. Your rear heater fan may work and perhaps the PO installed new soft hoses, but the original hard lines have been bypassed. The hose above it is for the front heater. First photo is a reference with the rear heater still in use. Second photo has the rear heater bypassed. In the second photo you can see the 1/2" rubber cap I installed over the rear heater pipe.

IMG_2966.webp


IMG_3069.webp
 
Why could I not find this in the FSM?

I was looking for it with the cooling system or the A/C system. No references or pictures.
 
There's a small handful of things that are just not in the FSM. I want to say I actually looked for something about the HVAC system and it just wasn't in there.
 
Back
Top Bottom