Hydraulic steering

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 9, 2004
Threads
101
Messages
1,454
Location
The West
it's about twice the flow (7.3gpm) and pressure (2750psi) that most automotive style boxes are meant to support. it would blow seals, if it was set up with the right size cylinder and a orbitrol, it could make a incredibly overpowered steering setup, a nice complement for 48 x 60 tires. but it's a little big for most things. not to mention that it probably has a max rpm that is a little lower. I suppose you could gear it down enough, but the pressure would still get you if you turned the wheel to lock it would be bad.
 
are u saying i would have easy enough steering that i could like blow on the wheel to make a turn. haha

ok. what seals are u talking about blowing? the hydraulic pump seals,


i liked the idea because i thought when u make a turn it would put the wheel back into the center on its own like newer cars and trucks. I donno if the older style pump do htat or not. just a thought
 
Back
Top Bottom