How do these birfs look?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 2, 2007
Threads
25
Messages
220
Location
Central NJ
Hello, new 80 owner here. Not sure how these are supposed to look or if these need attention. PO serviced these 40K miles ago. Im more concerned with the "wetter" one, but what do I know. :confused:

To me, its a bizarre design. What happens if you drive on the sand and bury it? Doesnt look like something that takes well to outside dirt, mud, chemicals, sand, salt water, etc. But again, Im sure the Toyota designers took this into account. Just seems odd to me. Here they are.
IMG_1657.JPG

IMG_1655.JPG
 
I'd be a little concerned about the "wet" one too but I would be more concerned about the fluid levels on both--especially on the one that looks dry. Take a look in the fill plug up top of the birf and make sure it is full of lube.

Kind of like riding in military helicopters--If you ain't slippin and sliding in hydraulic fluid on the deck, that means it all leaked out already.

Slight joke--but I make sure every time I get on one.

:D
 
That design keeps the joints themselves isolated from dirt, mud, chemicals, sand and all that crap. You're only seeing the housing that encloses the actual birfield joints on the front axle. Looks like you've got a leaky seal, but not terrible.

Closed birf joints have some disadvantages compared to modern, open cardan type joints, but protection from the elements is not one of them.

Birfs rule.
 
I'd be a little concerned about the "wet" one too but I would be more concerned about the fluid levels on both--especially on the one that looks dry. Take a look in the fill plug up top of the birf and make sure it is full of lube.

Ill do that, thanks!
 
Back
Top Bottom