High Idle after A/C compressor replacement?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Flank

American by Birth, Texan by the grace of God.
Joined
Mar 20, 2008
Threads
139
Messages
2,358
Location
Flower Mound, TX
Website
www.staltimber.com
I just had my compressor and drier replaced on my 95 after a clutch failure on my last compressor. Work was done by an independent shop in Vegas that specializes in Toyota, Lexus, Honda and Acura.

I picked up the truck this morning, drove for about 20 min to get home and parked it. Went to drive it this afternoon, and noticed at a stop light that I was idling at about 900rpm. I put it in neutral and it jumped to 1200rpm. This persisted on the drive home. Truck was at normal operating temperature.

So, I said to myself: "Self, this is weird". I usually idle at 600, and and know I was before the work was done. (My truck usually idles at 600, too...)

I am taking it back in in the morning. Any ideas what is up?
 
There is an "idle up" valve in the vacuum lines that is normally energized when A/C is on. If that is either malfunctioning to be on all the time, or something they did is causing it to stay energized, might be your problem.

edit: Sorry, forgot to mention that with this valve energized, it raises your idle speed to compensate for the additional drag of the A/C on the engine.
 
Last edited:
Back
Top Bottom