High Cabin Pressure Issue

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 10, 2017
Threads
49
Messages
1,361
Location
Seattle
I recently have been noticing that when i have the fan on high it makes it difficult to close the doors, and i hear a squeal when i do.
I noticed my A/C was randomly not working and dumped a can of R134a in to see if it was just empty. Seems i had a leak somewhere.

The rear vents have a lot of air moving through them when the air is on in the cab.

Now i have air pushing past the sunroof seal making a high pitched whine whenever i run the air on high.
It's noticeable enough that you can see the windows in the doors push out when you go from no air to high.

Are there other vents somewhere that may be blocked and i'm not seeing? I tried searching for a bit but can't find anything.
 
In the rear pillars.
 
Just looked at it more. Only makes the noise on high fan fresh air, not recirculation. Both rear vents are obstruction free.
It's high pitched enough to piss me off. Coming from passenger side somewhere. Anyone run into something like this?
 
Just looked at it more. Only makes the noise on high fan fresh air, not recirculation. Both rear vents are obstruction free.
It's high pitched enough to piss me off. Coming from passenger side somewhere. Anyone run into something like this?

I had some air noise coming from the front. I had the inside plastic cover the hides the side mirror bolts off for some time and noticed air noise coming from there at speed. When I took my side mirrors off to fix their "floppy" nature I used some butyl tape at the mount surface. It helped. Granted now I hear all the rattles and squeaks more.
 
Perhaps it is fan noise. Every decade or so it's smart to get that "rat wheel" fan out from the dash and empty the debris.
 
Just looked at it more. Only makes the noise on high fan fresh air, not recirculation. Both rear vents are obstruction free.
It's high pitched enough to piss me off. Coming from passenger side somewhere. Anyone run into something like this?

Have seen this on a couple of rigs when the passenger dash vent is closed.
 
I had some air noise coming from the front. I had the inside plastic cover the hides the side mirror bolts off for some time and noticed air noise coming from there at speed. When I took my side mirrors off to fix their "floppy" nature I used some butyl tape at the mount surface. It helped. Granted now I hear all the rattles and squeaks more.

Good thought. Will check there.

Perhaps it is fan noise. Every decade or so it's smart to get that "rat wheel" fan out from the dash and empty the debris.
Have heard the fan make a few noises recently. Will pull it and see if that helps.

Have seen this on a couple of rigs when the passenger dash vent is closed.

I'd laugh if it was something that simple but be very grateful. My girlfriend was sitting over there on the road trip and kept playing with the vent so maybe something that simple. I just can't get over how pressurized the cab in these things seems to get.
 
Have seen this on a couple of rigs when the passenger dash vent is closed.
Passenger vent closed

Drove the 80 to work today to mess with this. Passenger vent is open. Few things i noticed:
  1. Noise is only when travelling under 30mph. Constant until about 20, then flutters, then mostly gone at 30.
  2. Noise is only when on cold air, fades at mid temp range, goes away when on warm air (probably why i'm just noticing it after winter).
  3. Noise is only on fresh air, not recirculate.
  4. sounds like a loud whistle, but stutters a bit.
  5. Noise is only with fan on High. Goes away instantly with even one fan speed below.
  6. Its obnoxious enough that i would rather bake in the heat than have AC on high.

I'll look into cleaning out the fan box but kinda stumped on this one. I can't seem to pinpoint it's origin. It sounds like a weatherstrip leak from the outside but seems like interior when you're in the cab.
 
Perhaps it is fan noise. Every decade or so it's smart to get that "rat wheel" fan out from the dash and empty the debris.

The fan in my 80 squeaked when I got it. Figured I needed a new fan motor but pulled it out just to check and there were remnants of a plastic bag that got sucked into the fan lodged in there. I don't know how that caused the squeak but after cleaning the fan no more squeaking :)
 
The fan in my 80 squeaked when I got it. Figured I needed a new fan motor but pulled it out just to check and there were remnants of a plastic bag that got sucked into the fan lodged in there. I don't know how that caused the squeak but after cleaning the fan no more squeaking :)
Planning on pulling this out this evening and seeing how much stuff is in there. Since my tuna can was a home for a mouse at one point I wouldn't be surprised if I found something in the fan causing this too. Just weird that it's only on cold and not hot air since the fan would be cycling the same speed for both. Wondering if it's something in the evap core.
 
Planning on pulling this out this evening and seeing how much stuff is in there. Since my tuna can was a home for a mouse at one point I wouldn't be surprised if I found something in the fan causing this too. Just weird that it's only on cold and not hot air since the fan would be cycling the same speed for both. Wondering if it's something in the evap core.

If you haven't pulled the fan yet be ready - it'll be full of crap you never imagined!

Does your AC work well? If not I'd combine efforts and pull the evaporator to clean it out, etc....
 
If you haven't pulled the fan yet be ready - it'll be full of crap you never imagined!

Does your AC work well? If not I'd combine efforts and pull the evaporator to clean it out, etc....
That's another part of the saga. AC was painfully cold last summer. Now barely works. I'd like to pull the evap and clean but waiting to see if it's just blocked from s*** before I evacuate and pull the whole unit. I put one of those gauges for the s*** cans from O'Reilly on the low port and it wasn't reading which makes me think I have a slow leak somewhere.
 
Before you pull the evap add some dye to the system and pressurize so you can find the leaks (and find out if the evap is leaking). Also if you pull the evap definitely replace the expansion valve since its cheap and is a point of failure.
 
My fan has started to squeak like a rodent wheel, too. Not sure where it is on the list of "s***s" but it is climbing.
 
Before you pull the evap add some dye to the system and pressurize so you can find the leaks (and find out if the evap is leaking). Also if you pull the evap definitely replace the expansion valve since its cheap and is a point of failure.
Yep! If I have to pull it I may just replace it and the expansion valve since the denso replacement isn't much. Been digging way into the wormhole of a/c and all this.
 
Sounds like you may have reason to pull the evap out and do other AC work but I'll throw out there that you can do a decent job of cleaning debris out through the hole/access that you get when the blower motor is out. This may allow more troubleshooting and better operation short term, if you don't have time to take the evap. out for a while.

I used a combination of hand, shop-vac, water hose, AC coil cleaner, a few plastic tools and a borescope to clean the evaporator/box on mine and it was a pretty easy/effective task. Basically, just keep getting chunks out via hand/vac/plastic tools until it's pretty clean in there and then do a few coil cleaner soaks and rinse outs. Most of the water goes through the AC drain that passes through the firewall but some will get on your floor so a barrier may help keep your carpet from getting nasty.

Good luck getting it all sorted out.
 
Finally got around to pulling the fan and cleaning it out. Found nothing.
1953908



There was still a high pitched squeal whenever the cold, fresh air was on high.
Somehow the door panel is pressurizing on the passenger side and the window run/bottom seal is creating the noise. Slightly opening the door handle or pressing on the seal alleviated the pressure and stopped the noise. Not sure if a new run will fix it or not.
 
Any update?
 
Back
Top Bottom