HELP PLEASE- Less LEFT steering revolution

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 29, 2007
Threads
20
Messages
192
Location
Vancouver, BC
Less LEFT steering revolution after accident.

I got my dreamed 80 a month ago. Haven't got a chance to introduce myself and my truck, I got an accident last Friday night. I'm so depressed now. :frown:

A BMW M3 hit my passenger side. I think the impact started from my PS rim/tire, fender, PS door and stopped by the end of the running board. I got a flat tire, scratches on the rim, broken front fender, door and running board.

Anyway...make the story short, I have to fix my truck myself. The fender and door shell are easy parts. I probably will order the used ones from CruiserParts, since the new ones here in Vancouver Canada are really expensive, even I'm working for a Toyota dealership. I already took off the running board, thinking of upgrading to Slee siders later.

Now comes to the most important part, I'm worried about my whole front suspension part. I found my steering wheel was not in the middle position after the accident. It almost turned 90 degree clockwise. And I could not make a full revolution counter-clockwise. I thought it's the alignment thing.

I drove my truck to the dealership today and ask one of my technician to check it and do a alignment for me. After he finished the alignment, he found the steering still could not be fully counter-clockwide turned. Now the steering wheel is back to the right position. I can turn counter-clockwise one and half revolution and clockwise turn almost two revolution. He said he had no idea what's going on since he's not familiar with the live axle. :frown: It's pretty late at that time and we could not find a senior technician around. Also, we DON'T have a lot LC here in Canada so we could not find one in the lot to make a camparision.

When the truck was lift up by the lift, we found the whole front suspension was hanging a little bit to the drive's side, not lining on the chassis. Well, it's centered when we lower domn the tuck on the ground. Is that normal?

Finally, my technician suggested me asking help from here. :) He knows me checking this forum everyday. He thought maybe some bars are distorted, but no one seems to.

I searched the forum for the whole night, comes to the idea of Steering box jump teeth. So, I guess I really need help now.

Thanks so much.
JMZ-

Sorry about the pic.
1.webp
2.webp
 
x2. I've seen several 80's hit in the passenger wheel with the sector shafts snapped right off. Not that it would have to be the passenger side, but for some reason it seems to be a popular place to get hit. You might be putting yourself in grave danger by driving it, if the sector shaft is twisted- check it out ASAP.

-Spike
 
Thanks for your inputs. I will check it this afternoon.

JMZ-
 
I asked my buddy in the shop check it. He said it's definitly bended.
Thanks.
 
Back
Top Bottom