Help ID this tube please...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 5, 2005
Threads
116
Messages
1,273
Location
Calgary
I was showing my wife where the jack and tool kit are in our newly acquired 80, and took a deeper look into the bottom of the quarter panel for rust and found the tube shown in the pics below. I suspect that the tube with bubbles in it is washer fluid for the rear wiper, its the other one I have no idea about. It has a plastic 45* street T with barbs, and a black rubber tube on the end that is open. I tried to blow some air in it, but my head is too big to fit in that little cavity. I tried to trace it out, but got nowhere fast. I don't even know where to begin to look in the TSM for this tube as I have no idea what it does. Could one of you 80 series deities clue me in?

Thanks,

Karl
skinny_tube.webp
skinny_tube_2.webp
 
The clear tube is indeed a washer tube, not used in your application. The black tube is a vent for the difflock acutator.
 
Wow, I asked for a deity and got a cruiser god ( :) ) . Thanks for the reply. What do you mean not used in my application. Not that I expect you or anyone to know, but why the T and switch from clear tubing to black?

Karl
 
It is for barn doors. non US spec
 
Back
Top Bottom