Help a Newbie

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 16, 2018
Threads
7
Messages
81
Location
Sacramento
Ok Guys,

Here’s a newbie question. I just finished everything on my motor rebuild and was able to finally drive my 96. I’ve never driven one before so I don’t have a comparison to how it drives. Are these kind of doggy/slow? It doesn’t seem like it has any pep till above 2200 rpm. Timing is set to 3* with jumper in plug, operating temp at 190*, and I live at 60’ above sea level. No CEL

Does this sound normal?
 
They are big and heavy and under powered by most standards. If you use the POWER button it will raise the shift points up a few hundred rpm. That MAY feel a little peppier. These engines usually run out a lot stronger when you get them up around 3500 to 4500 rpm. Red line is 5200, and most of these rigs will run up there pretty well. You can shift up manually so that it doesnt bog down by shifting up too soon.
 
Back
Top Bottom