Hello, Just got my first 80

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 24, 2016
Threads
7
Messages
82
Location
Maryland
Hello,

I had been looking for an xj jeep as a trail rig for a few months until a friend sent me a quote from this forum:
"My 80 is what I had always hoped I could build a Cherokee into being right out of the box."
https://forum.ih8mud.com/threads/fj80-compared-to-cherokee.289702/
​
After reading that thread and a few others I realized that I really wanted an 80 all along. A little cruising of craigslist and forum classifieds later I lucked out and found a bargain on a slightly damaged local 80, picked her up yesterday.
https://forum.ih8mud.com/threads/1997-land-cruiser-for-sale.924393/
Wifes Black Betty Build

Now that I have her, there is a bunch of stuff I need to do before she is ready to pass the pre-title maryland safety inspection. I hope to have a MD title and tags by the end of may, then in the woods for june, then start upgrading after the first trip. I will be looking on the classifieds for new doors and a tail light. The local cheap you pick junk yard, CrazyRays/LKQ, does seem to have any LC in stock. I will start a repair and build thread once I am further along. Here is my current todo list
  1. New passenger Side doors and mirror, front door should bolt right in, rear door tweaked the c pillar a little bit.
  2. Passenger side rear quarter panel, this is the where most of the damage is, I hope to be able to push it out with my feet, or a hammer, or yank on it with a tractor
  3. Rear tail light, need to straighten out metal mounting area
  4. Tires/Wheels, need new tires , I like the 35" size, might change to larger wheels, need to research more
  5. Brakes, made some noise on the highway, need to inspect, dont have a jack large enough to get the wheels off yet
  6. Minor exhaust leak up front

--
feza

2016-04-24-small.webp


2016-04-24-small.webp
 
Hello,

I had been looking for an xj jeep as a trail rig for a few months until a friend sent me a quote from this forum:

​
After reading that thread and a few others I realized that I really wanted an 80 all along. A little cruising of craigslist and forum classifieds later I lucked out and found a bargain on a slightly damaged local 80, picked her up yesterday.
https://forum.ih8mud.com/threads/1997-land-cruiser-for-sale.924393/
Wifes Black Betty Build

Now that I have her, there is a bunch of stuff I need to do before she is ready to pass the pre-title maryland safety inspection. I hope to have a MD title and tags by the end of may, then in the woods for june, then start upgrading after the first trip. I will be looking on the classifieds for new doors and a tail light. The local cheap you pick junk yard, CrazyRays/LKQ, does seem to have any LC in stock. I will start a repair and build thread once I am further along. Here is my current todo list
  1. New passenger Side doors and mirror, front door should bolt right in, rear door tweaked the c pillar a little bit.
  2. Passenger side rear quarter panel, this is the where most of the damage is, I hope to be able to push it out with my feet, or a hammer, or yank on it with a tractor
  3. Rear tail light, need to straighten out metal mounting area
  4. Tires/Wheels, need new tires , I like the 35" size, might change to larger wheels, need to research more
  5. Brakes, made some noise on the highway, need to inspect, dont have a jack large enough to get the wheels off yet
  6. Minor exhaust leak up front

--
feza

View attachment 1247779

View attachment 1247782

Congratulations, I am a novice mechanic but I keep track of all the things I've done on mine to keep it "tuned", I've learned a lot from Toolsr us and Inkpot as well as everyone on this forum and Copper State Cruisers, here are a lot of things you might want to check:


Differential Gear Oil: Front pumpkin drain/refill. Must tighten at 32lb.s, open top first, then bottom, bottom has a magnet to collect metal shards

Differential Gear Oil: Rear pumpkin. drain/refill.


Suspension: Check and tightened Steering Nuts—four on each front under birfs
Knuckles: tighten the front knuckles both sides

Birfs: Lube Birfs on both sides

U-Joints: Greased on Front Drive Shaft

U-Joints: Greased U-Joints on Rear Drive Shaft


Engine Oil: Change oil (I use Mobile 1 Turbo Diesel 5w-40, nice recommendation from NXTLACY)

Engine: Change air filter about once every two (2) years, not every time you change the oil (we can argue this later).

Engine: Clean tuna can at

Engine: Tune Up (spark Plugs, plug wires, rotor, cap)

Engine: replace vacuum hoses

Engine: Breather tube

Engine: PVC valve and tube

Engine: Intake Pipe

OPTIONAL STUFF TO DO:

Transmission: flush and replenish 12 qts transmission fluid (World Standard Fluid--synthetic)


Battery: Get a 100 aH am hour battery (Platinum Gel Marine 31 battery)


Exterior: hood shocks

Exterior:
Prinsu Roof Rack (65lb)

Windows: Tint windows

Exterior: rear taillights approx. $40

Bumper: 4x4 Labs rear bumper, there are a few to choose from or custom

Bumper: front bumper lots to choose from

Interior: Seat covers

CB: Uniden 520xl CB and Rubber Ducky antenna

Interior: Rear Hatch springs

Interior: LED lights

Interior: Fire Extinguisher

Interior: Front door window moldings, window runs, and rear hatch (10/14)

etc.

Happy trails hombre,

Zona
 
Back
Top Bottom