Hello guys..where can I get lift block from

[cruiser88]

for my solid axle...actually mine is too big it needs lowered a inch or two. The ass end is too high....lol

 

[KLF]

I'm a little confused. Are you asking about putting blocks on the FRONT axle? Or looking for smaller ones for the REAR axle? What size are the ones on the rear axle now?

 

[Hilux]

I'd have them made (solid), and just get some U-Bolts....All the El' Cheapo's I've seen at AZ or where ever are casted hollow, with webbing. They don't exactly scream safety...but they are cheap

Not that you might not ever experience any trouble with them, it's just, it can happen...


and I, :sniff: just care soooo much for yew! :sniff:

 

[cruiser88]

I'm a little confused. Are you asking about putting blocks on the FRONT axle? Or looking for smaller ones for the REAR axle? What size are the ones on the rear axle now?

I found some local. the rear needs SMALLER rear blocks...on the rear axle/

I need to measure the size but i think they are 4 inch

 

[the truck doctor]

Fabtech makes them soild and taperd if needed. I run 2" tapered on the rear of my 89 , had the az cheapo's first but after a few trails and some wheel hop they started to crush on the front(pinion) side.

 

[GRM]

I have had alot of issues with random lift blocks not matching the size of the spring perch, or being hallow. For the cost, I'd pony up for some Roger Brown ones (4Crawler Offroad Products - Custom Leaf Spring Shims) or replace the leaf springs.

 

[raydouble]

Good god man get springs, don't f around with lift blocks.
If it has lift blocks in the front, loose em'.

 

[WristPin]

blocks are by far the WORST mod a guy could do to his truck.

For example: i put 3" blocks 1" add wankers in the rear of my 86.
in 2wd, up some nasty trail, blocks shattered, drive shaft flange ripped apart, u joint caps disappeared, axle rotated up 90 degrees, parkin brake cable got twisted and locked into place.

mmmm-hmmmm.

you want to be in that picture? didnt think so. do your self a favor and buy lifted springs.

 

[cruiser88]

I have lifted springs in the front and actually in the rear just not high enough to match the front. no lift blocks in front.