Hello from Noob

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 23, 2007
Threads
3
Messages
25
Location
Okanagan, BC
Hello all,

New to this forum and to LC/LX450's. In July I needed to replace my 97 pathfinder that I had for the past 8 years since it was starting to cost more and more to fix and it was @230km. I also wanted something that would make an even more capable fishwagon/DD. My Nissan never let me down but it always felt a little fragile and I was ready for something different.
In my search I came across this site :idea: and the addiction started. Almost immediately, I started looking for an 80 in the area. I'm not sure if it is the same everywhere, but here in BC, the LC are typically more expensive than the LX450's. So, after looking at a few, I found a 97 LX450 with just under 200km (120miles) that was pretty clean. It had spent most of it's life in the west but it had started out in the east. So there is a little rust here and there in the under carriage.:frown:

Right away, I base lined all fluids, had trany/4X4 shop do a full check on the drivetrain and grease everything up.

I also ordered a OME medium lift and ARB roof rack. I replace the tires. I think they might have been the original Michillin's LTX M/S as they were almost bald in the front and old looking (cracking ect.).

Anyway, I decided to put 285 75 16 Pirreli Scorpion ATR's on since we get a lot of rain, some ice and some snow and it was going to be a DD.

Like many 450's around it had some minor stuff to attend to.

-Power antena broken - have new one but just need to get the old peace of plastic out first.
- no CD changer cassett - dealer paid for new one. works great
- center caps need painting
- I took the spare and the chain mechanisim out. I don't think the spare had ever moved.

So, my appoligies for the long winded intro but I do have some questions for the very knowledgeable membership here as well.

1) As I understand, the OME medium lift is the same as the heavy but shorter. My plan is to get an ARB or Slee front bumper + winch down the road, so does it make sense to put the spacers in now or should I wait and put them in when I get the bumper?

2) When I press the front windshield washer button the rear window gets wet. Is it typical to replace or repair the diverter or is it something else altogether?

I also want to say thanks to all the members for putting so much great information on this forum and especially to those who keep it so well organized :cheers:. It certainly was a deciding factor for me in my jump over to the dark side.;)

Thanks again.

https://forum.ih8mud.com/attachment.php?attachmentid=171106&stc=1&d=1189009913
Lexus.webp
 
That's interesting. I certainly did not do an exhaustive comparison but of the ones for sale here at the time, the LC's where a few thousand more and the interior of the LX's seemed to have faired better over the years. Leather, fake wood trim etc.

I think they tend to get overlooked by a lot of people. Including myself before I came to mud.

Thanks.
 
Thanks 96r50. I think that is probably the part but just to clarify. Whether I press the button for the front or I twist for the back - I get fluid on the back. I get no fluid on the front no matter what I do.

Thanks again.
 
Mine was squirting both front and back no matter what button I pushed. You will need the new valve, and you should check to see if the hose up to the hood is connected to the valve at all!
 
Welcome to the madness:flipoff2:
 
Hello. Im new here too. Nice LX ;p
 
From one pink panty fan to another.....Congrats on your new pair!
 
Thanks guys. I’m very happy with the new panties. They bind a bit in the crotch when I play hockey but that suites me just fine. Oh..and just a quick question - Anyone else’s wife jealous of the way you look at your rig? Is this normal or is counselling in order?

Anyway, back to one of my question. Any thoughts?

Should I install spacers for the OME medium lift suspension I am waiting for now or should I put them in later when I get the ARB bumper and winch? (probably by the spring) Anyone else done this?

Thanks again for the great welcome. Hope to see you on the trail.
 
yes you need a new washer diverter valve ~ $30US
LCs do tend to sell for more than the LXs
i replaced my antenna with a fixed mast (if it broke once itll break again)
i got the heavy front springs to begin with (for bumper and winch)
standard or medium springs in the rear unless you plan to haul lots of heavy gear in the back (i tried heavy rear springs first and it jacked the rear way up.)
 
LOL - thanks guys.

Got my ARB roof rack anf some IPF lights today. :flipoff2:

I have a new power antenna from the dealer but will definitely change to a fixed mast if or when this one goes.

Ordered diverter valve today and will have it by Monday. It was $60 cdn at Lexus dealer:eek:. I called a toyota dealer yesterday and he wanted my VIN, birth date, social insurance number and a blood sample before he would even call the LEXUS dealer to order the part. I’m sure we have a cdan around here but I haven’t found one yet.:frown:

And, I think I will stick with the medium lift and put the spacers in when I get the bumper and winch. Seems to make the most sense and I don’t want the front end way up in the air for the next 6 months.

Take care.
 
Back
Top Bottom