Heep Manifold

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 7, 2006
Threads
39
Messages
384
Does annyone out there know if the late model jeep intake manifold bolt patern are the same or at least close to a F or 2F.

wanna put a multiport FI on a freinds FJ and it seams that that would be the way to go.
 
Its just one part!!!!
its not like I am putting a chevy or a god awfull cummins oil burner;)


BTW I run a SBC.
 
So I guess tha an intake off of a cherokee will not fit at all?
I can modify bolt locations just not runner placement.
 
It will fit about as well as a 350 chevy intake will fit on a 351 ford. Or a ford 427 on a caddy 425. It just don't work that way.

Making your own manifold from scratch would be a more reasonable approach.


Mark...
 
Actually the runner placement was my main concern.
If I have to make an intake and the fuel rail off of the heep intake works that will be one less thing to fab!


BTW Mark 460 ford intakes will fit on caddy 472/500
All I wanted to know was if the runners went into the head at approx the same point on the head.



Ed this is my own idea . looking closely at Megasquirt for the controller .
 
I have been looking at the mega squirt controllers a little too. I was thinking that my extra 2f intake has enough aluminum that I could posibbly machine holes for injectors my self and then build a fuel rail from tubing. I have not done much research on it yet, that will be for next winter. Good luck, and post up all about it when you start into it.
 
78Crusher[SIZE=2 said:
BTW Mark 460 ford intakes will fit on caddy 472/500[/SIZE]

So will a chevy 350 intake. Just toss it on there and it'll sit there just fine. ;)

A ford 429/460 intake will fit on a caddy IF you ue an adapter. Other wise it'll just rattle around in the lifter valley. ;)


Mark...
 
why not just toss on a TBI system and be done with it!
If I was butchering a GM ECM into the FJ I would use a TBI .;)
The Megasquirt gives you more fexible platform to use multipoint injection.
Besides if your gonna fab somthing like this might as well do one that stands out a little.
 
Mark W said:
It will fit about as well as a 350 chevy intake will fit on a 351 ford. Or a ford 427 on a caddy 425. It just don't work that way.

Making your own manifold from scratch would be a more reasonable approach.


Mark...
LMFAO. What an excellent analogy!
 
Sorry everyone I should have googled the part before asking questions.

Also Mark I see what you were saying, the two are completely different.:mad:

I would like to still go with multiport but I do not wanna cut into an expensive good cruiser intake.


So how close are they to cheby strait 6????
 
Cruiser intakes are not really that expensive or hard to find. I've got a pile of them sitting here with cracked plenums. A few minutes welding and they're as good as new.

I'd suggest that you go ahead and work with a Cruiser intake so that you can spend you effort on other parts of the build. But I was serious when I suggested just building your own as well..

Jim Van De Ven built his own for the tubocharged MPI system he put in a '60. He's got a write up on the websomewhere. A TLCA associated site I *think*. He sent me a link recently, but the message is on another computer. I'm pondering an equal length runner intake for a TBI setup whenever I get the time to delve into it.


Mark...
 
Mark,
You mean an equal runner manifold for a TBI or a TPI?

TPI- that makes sense.

But going to all the trouble of fabbing a manifold just to plop a Tbi on it and still have the problems associated w/ a TBI wet manifold setup?
 
Mark W said:
Jim Van De Ven built his own for the tubocharged MPI system he put in a '60. He's got a write up on the websomewhere. A TLCA associated site I *think*. He sent me a link recently, but the message is on another computer. I'm pondering an equal length runner intake for a TBI setup whenever I get the time to delve into it.


Mark...

Do you mean This link?


:D
 
FJ40Jim said:
Mark,
You mean an equal runner manifold for a TBI or a TPI?

TPI- that makes sense.

But going to all the trouble of fabbing a manifold just to plop a Tbi on it and still have the problems associated w/ a TBI wet manifold setup?


Actually I am thinking TBI. A prototype used with a TBI system can easily be turned into a carb system. Probably a few folks out there who would be interested in something like this and a more efficient or higher perfomance capable intake would be a simple conversion for just about anyone to do.

The actual intake for an MPI would be pretty simple to make.

I would love to have the time to do a full on turbo/MPI approach someday.


Mark...
 
Back
Top Bottom