Headlight Rebuild?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

LFD2037

TEXAS LEXUS!
Joined
Oct 22, 2013
Threads
183
Messages
3,889
Location
Wax., TEXAS
My headlights are a pain to adjust and one is maxed on adjustment. I don't think it's really maxed, I think it's just in a bind that I can't get it out of. Is there a thread somewhere that details taking it apart and replacing the guts (gears, screws, whatever) to make it adjust properly? Also, are the clear plastic 'eyes' that allow you to see the levels in the lights replaceable? Mine I can no longer see thru. Looks like some sort of chemical was spilled on them that kind of ate the plastic, or someone used sandpaper on them or something. Thanks.
 
I wrote up one somewhere when I rebuilt mine.

You can take the adjustment mechanism apart and repair it for basically free.

Usually what has happened is that the plastic gear on the metal rod separates and the metal rod spins free. Super glue this sucker back together, being VERY careful not to get glue anywhere else for the obvious reasons. ;)

Reassemble, and have fun.

Alternatively, you can just tear it apart, and make the adjustments with the headlight off the car.
 
I wrote up one somewhere when I rebuilt mine.

You can take the adjustment mechanism apart and repair it for basically free.

Usually what has happened is that the plastic gear on the metal rod separates and the metal rod spins free. Super glue this sucker back together, being VERY careful not to get glue anywhere else for the obvious reasons. ;)

Reassemble, and have fun.

Alternatively, you can just tear it apart, and make the adjustments with the headlight off the car.
Problem is, mine doesn't spin freely. Actually, it doesn't spin @ all!. I'll follow your link. Thanks.
 
Problem is, mine doesn't spin freely. Actually, it doesn't spin @ all!. I'll follow your link. Thanks.

I think if you tear it down, take it apart and clean it up, you might find the issue.

I think my shaft came loose from the gear, because the gears were stuck due to corrosion. And when I tried to adjust it, it broke loose.
 
Back
Top Bottom