Headlight compatibility?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 10, 2006
Threads
115
Messages
948
Location
Bonsall, CA
I heard (read) that there is a difference between headlights on FJ80 and FZJ80 trucks. Or maybe it was divided by production date and not model?

Anyway, I would like to know if there are really some differences in headlight shape or mounting tabs, or anything else. I am about to buy headlights for a 'secret project' and all I have found is headlights for FJ80 and for FJ82 (wtf is that?) Are these interchangeable with a 1996 FZJ80?
 
B to the U to the M to the P !!!

So could anybody help me with this? Everywhere (ih8mud, slee, etc) I find that the lamps between 91-94 and 95-97 are not interchangeable due to different mounts. But what about people who have bought aftermarket headlights and installed them on different model years with success? Or maybe not with success?
 
FJ82? Hmm.... Must be their interpretation for the FZJ80. lol

As for the headlights, I'm guessing that there are two sets of mounts, to accomodate both versions?

Just my $.02.
 
IFAIK the '90-'94 and the '95-'97's mounts are the same, but the chrome trim above (below?) do not match colors. But they will mount.

If it's the LX450, then I think the shape of the grille is slightly different, but that should still fit, maybe with a little gap between the grille and the headlights.

I've done the '90-'94 and the '95-'97 swap, but not the LX swap. So don't take my word for it.:D

I've put on a pair of aftermarket (multi-reflector, not projector) and they either come with the chrome pieces above/below the headlights painted chrome ('95- model) or dark (-'94 model).

Good luck!
 
Thanks a lot Mot for the answer. This is the information I was looking for.

I am aware that the LX has a different grille. The upper part will overlap the upper corner of the headlight and the lower part of the grille is recessed so there will be a slight gap between the light and grille. But I am planning to buy an aftermarket grille next.
 
Not meaning to hi-jack this thread, but on my 94, I'm needing a new drivers side headlight, (looks like a bb got it) so is the 95-97 light any better than the 94?

Are there good ones on Ebay that are updated looking and save some bucks over stock?

A link to anybody recommended for aftermarket ones would be great!

Thanks for your assistance.

Bryan
 
Not meaning to hi-jack this thread, but on my 94, I'm needing a new drivers side headlight, (looks like a bb got it) so is the 95-97 light any better than the 94?

Are there good ones on Ebay that are updated looking and save some bucks over stock?

A link to anybody recommended for aftermarket ones would be great!

Thanks for your assistance.

Bryan


stock stuff is glass, after market is generally plastic and the quality is lower, but so is the price, your pic,
 
That's right. For OEM headlights you have to throw probably around $600. They are nice, they are glass etc. Aftermarket lights cost you $200 total and I don't think they last three times shorter. Don't expect high light quality, but the output of these bling lights is comparable to stock. If you are not anal about cutoffs, luminosity, even spread etc.. then just buy the bling lights and forget about your problem. If you are a light maniac, then you should make a HID retrofit onto the headlights or buy the OEM ones and HIR bulbs.
 
Now how to convert the grill/headlights over to some of the JDM type that use 4 individual square headlights? I would think that after the conversion the headlights would be cheaper and easier to replace?

I have a rockchip/hole in my headlight and each time I come across one for sale I think of converting...
 
The grilles with 4 square headlights are specific to Australia. They make the car look like crap and the headlights themselves are probably crap too.

The JDM grilles are a bolt-on and are compatible with the headlights we already have (well, you have, cause I have an LX with different lights and grille).
 
Don't mean to hijack your thread but where can we get the JDM grilles here in the US. I just bought the projector headlights from ebay for my lx450 and I would ike to swap the grille as well.

Alex
 
Now how to convert the grill/headlights over to some of the JDM type that use 4 individual square headlights? I would think that after the conversion the headlights would be cheaper and easier to replace?

I have a rockchip/hole in my headlight and each time I come across one for sale I think of converting...

I think they look cool, but that's probably just because they're unusual. I was thinking about the swap but then thought about the light pattern. You'll never get the throw with those rectangular sealed beams that you get with the OEM "deluxe" lights.
 
Lexus headlamps are a slightly different shape - not just the grille, just to settle that one. They're not likely to fit well on a Cruiser and vice versa. I was surprised to find this.

We sell tons of 3M headlamp film covers and never a broken one in thousands of cars. Here in the NW, the roads are one of the harshest in North America due to the use of traction sand. Lots of protection for very little money.

Also, if the JDM quad headlamps are from Japan, you'll be putting a right hand drive pattern on a left hand drive car. Ditto Australia. I simply cannot think of a way to have a worse setup in terms of lighting.

DougM
 
Back
Top Bottom