Head off finally!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 27, 2009
Threads
60
Messages
148
Location
In a van down by the American River
Finally managed to get HG exposed for rebuild on my LX450. Looks like typical #6 blow out but fire ring cracked on #1 also. Got all the OEM stuff from Beno for rebuild but not sure how to prep block for putting new gasket on and cleaning out cylinders (which still had hone marks at 220 miles). Im assuming this is original HG but im not the expert to make that call.

20181104_111727.webp
 
  • Like
Reactions: MoJ
Clean that hg off and inspect the block surface for pitting /etching into the block where coolant has worked under the gasket.

Blowing up your pic shows some serious pitting near #6......but you need to clean clean clean and then snap some pics.

3FDD853B-A2F6-4F59-B2B1-EE379FA93CD7.webp
 
Back
Top Bottom