Head gasket cost

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 5, 2006
Threads
56
Messages
142
Hey guys , It's been really nice out these past few days so I was riding the bike , I went to take out the 1996 LX450 and noticed the exhaust ...I knew right away it was my head gasket .
It was not over heating ...It must have went when I was on my way home .
Whats the cost of the average head gasket install these days , I know I can pick up the gasket kit from Cdan .
I am so busy right now , I just picked up a new toyota taco , I really don't have the time or what to let the suv sit .
I would love to throw a diesel in the lx , but my days of tinkering are done right now ... just so busy these days with work .
I may just price it right and sell it out right , thats why I was wondering what the average price of a head gasket job was going for these days .
Thanks guys .

greg
 
Last may I paid 3200.00 That included 600.00 in machine shop work, waterpump, radiator R&R head all hoses, the Alternator and I am sure a few pm things I am forgetting.

Good luck.
 
I did all all the hose's , waterpump . rad , fan , belts ...everything but the headgasket .
Thats alot of dough you put out .
I can do the job my self , I am a retired motorcycle / mechcanic ...I just have to weigh out my time verses paying someone or just selling the SUV out right .
I don't want to let it sit too long , the truck is a geat machine and just dumper 2500 in all the brakes , front end rebuild , cooling system ... I did all that my self and all the parts came from Cdan .
 
i live in southern CA.
and was given two quotes:$2600 and $3500 dollars for labor, parts and machine shop.
i found a mech that has estimated about $1000 in labor, spent $350 in parts-hg kit/valve grind, alt brushes, water pump, plugs, belts etc. and $400 at the machine shop-resurfaced and valves adjusted.
so far i have been happy with the progress-i hope to get the cruiser back this coming week.
if all turns out well, i will be more than happy to endorse this mechanic.
 
Last edited:
i live in southern CA.
and was given two quotes:$2600 and $3500 dollars for labor, parts and machine shop.
i found a mech that is estimated about $1000 in labor, spent $350 in parts-hg kit/valve grind, alt brushes, water pump, plugs, belts etc. and $400 at the machine shop-resurfaced and valves adjusted.
so far i have been happy with the progress-i hope to get the cruiser back this coming week.
if all turns out well, i will be more than happy to endorse this mechanic.

ronin-0707:

I am too in SoCal and looking to get my HG done. Please let us know once you get the vehicle back and, if you are happy, who your mechanic is. Feel free to PM me if you like.

Good luck! :cheers:

-Craig
 
Dose not appear to be any head damage short of pulling it a part , runs and idles perfect .
I may just price it acordinglly and sell it as it is , I just have no time to work on it and don't want to leave it sit , it really is a nice truck .
 
smug
no problem on the report-I'm sure missing my cruiser
 
Besides me being a retired mechcanic , no coolant left in the overflow , not much coolant in the radiator and typical coolant smelling steam out of the exhaust .
Should it be running crappy with a blown head gasket ? I am assuming it's leaking into the cylinder since the oil seem fine .
I did a 300 mile ride last week and checked all the fluids before leaving and all was fine .
I assumed the head gasket went 2 days ago , that was the last time I had the LX out , I had the truck forsale for a while now ...good thing I did not sell it to a guy I had looking at it last week .
I would not have felt right if he bought the truck and the head gasket let loose and then I would have had to make good for that guy .
I am proibly just going to put it out forsale the way it is . I am not going to refill the cooling system , I don't want any coolant sitting in the cylinder , and it starts and runs great .
 
Check all Clamps and hoses

One thing you might want to check is the upper rad hose to pipe connection below the dizzy. Due to board paranoia I once convinced myself that my hg was done but alas it was a faulty clamp.

Seems like everything is good at idle but once you drive the pressue/heat increases forcing fluid/steam past this clamp, in time your fluid levels drop causing stress...

A quick visual check would be looking for crud at the connection as well as other clamp locations.

Other indications are unexplained disclourations/deposits due to the fact that your fan is blowing this mist throughout the engine bay.

This took me months to figure out as the truck ran so well otherwise.


I truly wish that this is your problem and not the fore mentioned.
 
I just did all the new hose's and clamps ... I would love to have it be something stupid , there's no other explanation for the steaming antifreeze coming out of the exhaust .
The truck is still drivable , I just don't want it to build any pressure in the cooling system , I don't want any more coolant getting in the cylinder .
It sat over night and must have leaked in thats how I knew when I first fired it up and it was 70 degrees out and gaint steam cloud was comming out of the pipe .
It cleared out and I popped the hood and discovered the missing coolant .
I just started to advertise it locally and I did list it on this site forsale .
With my time and work I proibly would not get to work on it this summer , I don't want to leave it sit , I have to many trucks as it is .
I priced it right ... especially if some has time to do the job .
$7000
 
I just did all the new hose's and clamps ... I would love to have it be something stupid , there's no other explanation for the steaming antifreeze coming out of the exhaust .
The truck is still drivable , I just don't want it to build any pressure in the cooling system , I don't want any more coolant getting in the cylinder .
It sat over night and must have leaked in thats how I knew when I first fired it up and it was 70 degrees out and gaint steam cloud was comming out of the pipe .
It cleared out and I popped the hood and discovered the missing coolant .
I just started to advertise it locally and I did list it on this site forsale .
With my time and work I proibly would not get to work on it this summer , I don't want to leave it sit , I have to many trucks as it is .
I priced it right ... especially if some has time to do the job .
$7000

$7000 is close to being the right price with an intact head gasket. I would think more like $4000 would get it sold.
 
Back
Top Bottom