HDJ101 - DriveShaft Help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 19, 2026
Threads
1
Messages
1
Location
USA, Connecticut
Hello everyone,

I’m brand new to the forum. I have a 1999 HDJ VX Limited with 4.2 TD and 4 spd automatic. It has about 150,000 miles. I’ve noticed a loud Clunk when going from drive to reverse. Also, I have occasionally been dealing with my rear end aggressively juttering/vibrating as I roll to a stop (not braking).

Looks like a common culprit is the slip yoke/U joints. Has anyone dealt with a similar issue? I lightly greased the Zerk fittings and it helped for a bit.

If the slip yoke/ujoints need replacing does anyone know if the JDM model share the same drivetrain part numbers/components as the U.S. 2UZ models? If so I will order OEM parts from my Toyota dealership (in Connecticut). Thanks in advance and I’m happy to join the community.
IMG_3062.webp
 
You can cross reference parts on a site like partsouq, enter your VIN and see if they're the same. Also, if you search "clunk", titles only, 100 section only, you'll find a few other possibilities to check.
 
Back
Top Bottom