HCV Hose

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 24, 2012
Threads
17
Messages
92
Location
Memphis, TN
i just replaced the PHH and the HCV and it’s associated hoses. I used gates hose from Napa. The only problem is that the new hose that comes off the valve and connects to the down pipe to the PHH is crimped at the point where it bends. Is there a way to form a bend in the hose so it won’t crimp?
 
Back
Top Bottom