Hardtop

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 10, 2006
Threads
99
Messages
501
Location
The Ghetto
I just put my hardtop on this weekend and I was finishing with the bolts and I realized the front outside tip of the hardtop doesn't seal directly onto the windshield frame. On either side it touches no problem but the middle portion (about 1 ft in length) has about a 1 inch space. I can reach up and over the inside windshield frame and feel the outside air. I've already tried to move the top around but everything fits except that portion. Do I need to move the windshield farther forward? Am I missing a part or do I need to seal that off with weatherstripping?:confused:
 
IIRC there is a metal lip on the inside of the fiberglass top that the windshield should meet up with. And I think there should be a piece of weatherstripping or something so you don't have metal to metal contact.

I'll seee if I can find a pic.
 
Here is a pic where the metal piece can be seen. Does your top have this??

6.jpg
 
do you have the weatherstrip in place? the piece that bolts to the w/s frame is thin metal, and will pull back to sandwich the w/s a bit to help seal it up. there will be a nasty breeze without the weatherstrip and a you will have a blinding snowstorm inside if there's bad weather outside...don't ask how i know that :D
 
Ah ha...I knew it. I was beginning to think my top was FUBAR. I bought some W/S the other day that I can put up there. It's not LC stuff but it'll work. Thanks guys.
 
Back
Top Bottom