Hardtop Window removal?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 23, 2004
Threads
43
Messages
209
Location
Ride in VA now in NOVA
Im soon to finish most of the sheet work on the doors, tub and hard top. As soon as I can arrange a location and some tools I'll be doing a home grown paint job with some POR-15 Hardnose. But to actually do a half way decent job and help combat rust gathering in the window seals... HOW do I get the hard top windows out without cutting the rubber or breaking the glass? Is it possible? Is there a trick that makes it any easier?
BTW... the rubber is stiff not dry or cracked, probably not as flexible as new but still has some life left in it!

Peace
Neal
 
I got all my windows out without breakage. Well, all but the windshield. I used a flat head screwdriver and a 1 inch chisel. You start from inside the truck. Choose any window and lift the rubber away from a corner, should be able to do this with your fingers. Then work the driver up under the rubber until you can get it between the metal window frame and the glass. You just push the rubber over the metal , slowly working your way around until the window pops out. Careful not to drop it! It's real easy once you get the hang of it
 
I have a Jan of 71 fj40 which I ordered window rubber for the entire hardtop minus windshield. What I got from CCOT was late 70's rubber. They fixed it and all is better now, but I have a complete set of new rubber for late 71 and up if you would like it. Free just pay shipping.

Les
 
Back
Top Bottom