HAM: NGA-FJC's minitruck (1 Viewer)

[NGA-FJC]

We determined that the gas tank does not seal well so after a few days rain it fills up. Then we found out that it does not run on water. So while my brother and I were out getting parts for the rear. Dave, John and Josh cleaned out the fuel system. So now it has new rear seals, new wheel bearing on the right. But still no brakes. We'll replace the master cylinder and bleed the system next time. We still need new seals for the front axles and swap the carb. Baby steps.

Thanks again to John, Josh and Dave for helping out!!!!!

 

[4in100]

I've got my old MC in a box from when I swapped it to an FJ60 box. It was working with no leaks when I removed it.

 

[TeddyBoy]

I've got my old MC in a box from when I swapped it to an FJ60 box. It was working with no leaks when I removed it.

I could use it if Eric doesn't take you up on it. Tried a rebuilt one and then tried to rebuild my old one, neither worked.

 

[schmitty]

Why hasn't anyone posted pictures of this beast yet?

 

[4in100]

I could use it if Eric doesn't take you up on it. Tried a rebuilt one and then tried to rebuild my old one, neither worked.

Cool. Who ever wants it can have it for a case of suds.

I've got some other stuff around here that I'll go through to see if it is of any use to anyone

 

[TeddyBoy]

Cool. Who ever wants it can have it for a case of suds.

I've got some other stuff around here that I'll go through to see if it is of any use to anyone

PM your whereabouts? I'll be running around Atl Friday unless you're in the Cumming, Ga. area.

 

[HENDOG]

aaaaaHHHHH Suds!!!!

 

[NGA-FJC]

Someone ask for pictures?

 

[schmitty]

How about wheeling pictures

 

[4in100]

I call BS!

1) That thing's never wheeled
2) It's sitting outside John's shop, not inside someone else's shop.

haha, it is a nice rig. Would be nice to see it go.

 

[Kodek]

How are you going to wheel this and your cruiser?!?!?!?!?!

Mike

 

[armytaco]

One at a time.