Got the call back from the shop.. repairs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 17, 2008
Threads
10
Messages
44
They said the reason for the hesitation problems is my O2 sensor is spiking? It is only 2 years old! They said it is because it is an aftermarket sensor. Also The throttle body gasket needs replaced. 1300 dollars for that. Also the front wheel bearings are going bad! Im not gonna replace the 02 sensor, just the the gasket on the throttle body. How hard is it to do this and the wheel bearings?
 
The throttle body gasket is about $10 and 4 bolts to undo. Anyone can do it. As for the wheel bearings, check the FAQ under front axle service. Not too hard, but requires a few special tools.
 
Whats your local?
There maybe a mudder thats close by that has done these before and give help you out some .




They said the reason for the hesitation problems is my O2 sensor is spiking? It is only 2 years old! They said it is because it is an aftermarket sensor. Also The throttle body gasket needs replaced. 1300 dollars for that. Also the front wheel bearings are going bad! Im not gonna replace the 02 sensor, just the the gasket on the throttle body. How hard is it to do this and the wheel bearings?
 
thanks, are aftermarket parts okay? Not sure about the bearings
 
thanks, are aftermarket parts okay? Not sure about the bearings

There's alot in the FAQ on front axle rebuilds - it's kind of an hobby here :flipoff2:

It's not all that hard, but very time consuming. Plan on at least a weekend for your first attempt unless you're already a :wrench: god

That quote doesn't surprise me - it probably breaks down to $300 for the O2 sensors & TB gasket and $1K for the axle rebuild.
 
actually that is just to replace the o2 sensor and throttle body gasket, 1300 dollars. I live in Virginia, Newport News. I plan on doing this myself. Its just gonna take some time. Its just strange about the o2 sensors I did a diagnostic test, everything is okay. Code 1 constant flashing, and so did they. Maybe the new gasket will fix the hestation problem. Man I just bought this cruiser and the fun begins. Is cruiser dan a good source for front axle rebuid? Bearings and seal etc.
 
$1300 to replace one o2 sensor and throttle body gasket is highway robbery. I would be furious if anyone ever quoted me that for such work. Cruiserdan is a great source for the front axle rebuild kit.
 
There's alot in the FAQ on front axle rebuilds - it's kind of an hobby here :flipoff2:

It's not all that hard, but very time consuming. Plan on at least a weekend for your first attempt unless you're already a :wrench: god

That quote doesn't surprise me - it probably breaks down to $300 for the O2 sensors & TB gasket and $1K for the axle rebuild.

You don't have to do a full axle rebuild to get to the wheel bearings. It's as easy as replacing the front rotors. Spend $30 at Harbor Freight on the bearing race tool so you don't mess anything up. The kit also works for axle seals if you ever do the axle rebuild.
 
Print out the FAQ axle rebuild section, buy and FSM and plan on a long weekend. Really most of your time will be spent cleaning the parts.

It's really not that hard.
 
They said the reason for the hesitation problems is my O2 sensor is spiking? It is only 2 years old! They said it is because it is an aftermarket sensor. Also The throttle body gasket needs replaced. 1300 dollars for that. Also the front wheel bearings are going bad! Im not gonna replace the 02 sensor, just the the gasket on the throttle body. How hard is it to do this and the wheel bearings?

Super easy stuff. All of that can be done by you for quite a bit cheaper.
 
thanks, are aftermarket parts okay? Not sure about the bearings

You can get genuine Toyota parts from Cruiserdan (at a discount) for about the same price and sometimes cheaper than aftermarket. There are a few exceptions though, i.e. exhaust system parts. Generally, when people use aftermarket parts, i.e. alternators, radiators, fan clutches, fanbelts, etc. they often experience failures within a couple years. I would recommend using EOM whenever possible.
 
Your hesitation problem could be as simple as dirty injectors. A tank or two of BG44K or other fuel system cleaner in the tank could clear up your problem.

Learning how to do the front bearings is a great way to learn about your cruiser and earn some experience doing your own repairs. The big socket for the wheel bearing nut and a brass drift are all you to get the bearings done. Open up a :beer: and do some searching here, and you will be an expert before you know it. With the money you save, you could by some of that fancy beer that only comes in 12 oz. bottles. :hillbilly:
 
sweet, thanks for the words of encouragement. I was begining to get buyers remorse. I bought the LC for 5000. What sold me was the list of work done in the past 2 years. Mainly new vacuum control system, new heater and air cond. control unit, new power steering pump,rear brakes and rotors all in 2007. Some more odds an ins. The front seals were replace in late 2005, but I guess they did not repack or replace the bearings. The light squel in the front drivers side wheel just started, I didnt here it when I bought it.
 
Do NOT trust ANY of their diagnostics at this point:

-The (which one, anyway?) 02 sensor is bad?? Determined how?

-The throttle body gasket needs to be replaced?? I've never even heard of such a thing. Is it causing a vacuum leak, or...?

-Wheel bearings need to be replaced?? Again, determined how? Just because you mentioned there's a squeal from the front end maybe? They might be bad or they might not, but there are easy ways for you (or a DIFFERENT tire/wheel shop) to determine this.

Slow down, keep researching here and gathering information. The only thing you've mentioned that needs to be addressed quickly is the front end squeal. Have someone else take a look at that, or tell us more specifically what's going on and we may be able to diagnose it.

Curtis
 
They probably want to replace both o2sensors, how can I tell which one is bad? Air is leaking from the throttle body gasket, thats what they said anyway. I'll see tomorrow when I pick it up. I'll check out everything they said anyway. I bought a gasket for ten dollars so I'll replace it anyway. The squeal I check out tomorrow also. Its not the brakes, I dont think. Its a constant noise. Im in the whole 90 bucks for them to determine this, so I dont plan to take it anywhere else. How can I tell if the sensor or sensors are bad.
 
I'm totally with Curtis' post 14. BS on the gasket, replace the O2 sensor yourself with one from Cdan, and you didn't provide the quote for the front end repack but do it yourself and bank the $1000 you'll save in a weekend. You're new and sound like you're about to fork over 1300 for near nothing, then they'll charge at least 1500 for the repack. Don't do it.

DougM
 
You don't have to do a full axle rebuild to get to the wheel bearings. It's as easy as replacing the front rotors. Spend $30 at Harbor Freight on the bearing race tool so you don't mess anything up. The kit also works for axle seals if you ever do the axle rebuild.

Yea, but if you're going in that far, I'd do a birf re-pack while I'm at it.
 
Okay I got the cruise back today, and puuled it in my shop. Took the wheel off, look at the brake pads, they are shot. Thats whats making the squel. The shop told me it is the wheel bearings. Now my question is on the inside knuckle, Half moon thing that piviots for turning. There is a gasket or like a wiper seal. Some grease has migrated out on both wheels, nothing major. Is this normal?
I also called cruiser dan and left a message about the o2 sensors. Hopfully this will get me up and running again. The shop also said I need a need speed sensor and pinion seal. How does the speed sensor affect my vehicle?
 
A little film of grease is normal. A lot of grease is not. A good picture would help us determine which you have.
 
Back
Top Bottom