Get the Seat Mod!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 6, 2006
Threads
39
Messages
223
Location
Eugene, OR
I just finished installing landtank's Seat Mod and all I can say is get one! If you need a little more leg or head room, get one! Now, it's just the way Toyota should have got it in the first place.

Thanks landtank!

Gene
 
I've never heard of the "seat mod" but I was just thinking to myself the other day "why the heck dosent this seat go back further?" Where do I find the info?

THanks!
 
Rick,
Paypal sent. Rick has agreed to make more brackets if two other people pre-pay the $95 cost. Don't slack on this mod!
 
I don't mean to hijack, but isn't it possible to hammer down the hump the seat motor is hitting to gain more room? There isnt' anything under that hump if I recall. Has anybody done this?
 
I don't mean to hijack, but isn't it possible to hammer down the hump the seat motor is hitting to gain more room? There isnt' anything under that hump if I recall. Has anybody done this?

Have you tried it yet? If so, what were the results?
 
I haven't tried it yet, but I thought I heard of someone on here doing it. You may not gain 2", but even 1/2-3/4" would make a big difference.
 
You realise the chair bolts to that hump and the motor assembly in front hangs down below the edge of the chair.

The reason for me to place the block in there is to raise the chair on the rails so that motor is above the edge of the chair and clears the hump.

Just pounding down on the hump still leaves the issue with the motor being lower than the chair's edge and now dragging on the floor.

One guy raised the whole chair so the feet were on top of the hump and then used plates to move it back. This worked fine however the end results were that the chair was even higher in front. This places the chair in a more reclined position, which I didn't want either.

I'm 6'6" and only wanted to raise the front of the chair just enough to clear the motor, nothing more.
 
Good friggin' thing I got mine!

Why? You are just going to sell it for a 100 series anyway. :flipoff2: I put this in my 80 before I sold it to my very tall friend. I think that something like Johnny Lange made is a little simpler, but LandTank's kit is very slick.
 
Why? You are just going to sell it for a 100 series anyway. :flipoff2:

We decided to not sell the LX. With it vibrating at OME height we know we will eventually find the culprit. We'll live with it and wheel the crap out of it. We're a little worn out on vehicle modding right now and need a break. :D

Very glad my rear end is farther from the wheel! :D
 
WOW, I just checked my mail and had to change the order. Right now I have 6 people who have prepaid for their kits. I ordered enough parts for 10 kits incase there are a couple of late comers or if someone wanted to modify their front passenger seat while they are at it.

So as of right now there will be 3 kits available (1 person ordered 2) when they arrive.
 
Last edited:
Back
Top Bottom