Gas Guage..... d'oh

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 19, 2006
Threads
21
Messages
62
Location
Southern Ontario
So, I m trying to fix my odometer yesterday... have the gauge cluster out... but cant seem to get the speedo needle to come off nice (didnt want to yank and pull and break the thing). So I give up :o ... put everything back together and seem to loose the gas gauge - as in, it aint working.

I dont believe anything is unhooked - it almost appears like I moved the needle when bumping it against the metal frame trying to put the cluster back.

Any ideas on how to reset it or get it functioning ?

(I am trying so hard to figure this stuff out... fawk, I may be doomed to being mechanically inept all my life :crybaby: )
 
i am not big on the electrical side of things, but you did disconnect the battery cables before removing the cluster didnt you ? if not you may have shorted things out. check fuses, maybe you got lucky and blew one and not the guage. good luck and wish i new more. sorry!
 
If none of the gauges (besides the amp meter) work, check the fuse.

Check if the meter still works first: momentarily ground the sender side of the gauge and see if it pegs at full. If not see if you have 12 V on the other side of the gauge. If yes, the gauge is open (fried). If no, keep following the circuit back until you find 12V.
 
Back
Top Bottom