G52 tranny to VF1A

[mferguson28]

I have a G52 tranny what i have to do to match it with a VF1A T-Case??

 

[2ndGenToyotaFan]

You want to put a chain driven transfer case behind a G52? Probably because you have them right? If then don't bolt right up, which I'm pretty sure they don't, then you're probably going to have to do something custom. No one wants chain cases, so I doubt there's aftermarket support for that swap.

The only hope I see is if you got the rear half of a G58 trans, as it came with a chain T-case, but there's no guaranty that it will go on the back of a G52 trans, or that your t-case will bolt to it...

Edit: Looks like the G58 came with the VF1A, but I still can't say if the G58 rear case will bolt to the G52 front http://www.4x4wire.com/toyota/faq/parts/

 

[WristPin]

i tried that before. doesnt work.

 

[mferguson28]

Thanks..

 

[2ndGenToyotaFan]

Sounds like you need a different trans, or a different T-case... Good luck!

 

[WristPin]

right. the chain one aint worth two bits anyway.

in case yer wonderin, the input shaft coupler is too long, and IIRC it also has a different spline count