FZJ80 Mirror Problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 13, 2020
Threads
2
Messages
19
Location
Jamul
I noticed my 95 FZJ80 had the common side mirror shake so I was going to take it off to fix it and when I went to put the screwdriver in the hole at the bottom of the housing, there was not even a spot for a screw. I unclipped the mirror from the motor and found that it doesn’t look like any of the images I’ve seen in other threads but the housing looks identical. Thoughts? I searched the part number on one of the motors (JCD122-0000) but it didn’t help.

5939F8F9-0CC3-4E0D-B1B3-DF5BF686EDA4.webp


FE9FAEB1-DCE2-4871-86A6-2C148F89A282.webp
 
Aftermarket from eBay or Amazon. I have the same type of mirror (PO installed) and same problem (shaky on the left side). If you come up with a workable solution, I'd love to hear it. Otherwise, when I took mine apart, it looks like the mounting points are all there for OEM guts. If you could find the insides of an OEM mirror and then get the brackets Outsane makes, problem solved! Otherwise, a similar mirror retails for ~$50-$60 on eBay or Amazon. Good luck and update this thread with whatever you end up doing.
 
Aftermarket from eBay or Amazon. I have the same type of mirror (PO installed) and same problem (shaky on the left side). If you come up with a workable solution, I'd love to hear it. Otherwise, when I took mine apart, it looks like the mounting points are all there for OEM guts. If you could find the insides of an OEM mirror and then get the brackets Outsane makes, problem solved! Otherwise, a similar mirror retails for ~$50-$60 on eBay or Amazon. Good luck and update this thread with whatever you end up doing.
Thanks for the reply! That’s what I was afraid of, I’ll definitely reply if i find a way to fix the shake.
 
Back
Top Bottom