FZJ105 -> HDJ105 (1 Viewer)

[wedgetail]

Hi wedgetail
Great read mate well done!!!
Not sure if you can help me or not? I have just put an 02 hdj100 fte in my 99 fzj105 I used the hey engine bay loom, dash loom, ignition, immobilser module, original key and earthed the spill module.
Went to start it yesterday and I don't have power to the injector pump?
Any help would be very much appreciated

Hey mate sorry only just seen this - what do you mean no power to injection pump? What and where are you measuring? Don’t think there’s anything that gives a solid +12v to the pump - it’s not that simple.

As you’ve earthed the spill module, first check is the immobiliser I reckon. Does the key/car symbol come on with the key out and go away when you put the key in? Put your finger on the spill relay and get someone to turn the ignition on - can you feel it click?

 

[wedgetail]

Finally replaced the POS Toyota bar with a nice ARB. Couldn’t find a 105 bar anywhere when I was looking but this 100 winch bar ended up fitting pretty well. Still have my Warn winch sitting in the shed for it though

 

[random101]

Bah, I’m going through the same sump deilemma.

The 100 series is a touch deeper and apoerantly hits the diff.

Trying to find a 1hdt with oil pickup is very difficult in aus.

Anyone has one - let me know!

 

[mudgudgeon]

Bah, I’m going through the same sump deilemma.

The 100 series is a touch deeper and apoerantly hits the diff.

Trying to find a 1hdt with oil pickup is very difficult in aus.

Anyone has one - let me know!

1hz should have the same sump
Check part numbers on toyodiy