funny sound

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 1, 2006
Threads
24
Messages
106
Location
Brunei
when using h2, no sound...
but while using h4 or l4... there's this clunking sound..
what is it?

oh yeah, what type of tool should i use to get to that grease fitting in the propeller shaft/yoke?
 
roddie1154 said:
when using h2, no sound...
but while using h4 or l4... there's this clunking sound..
what is it?

oh yeah, what type of tool should i use to get to that grease fitting in the propeller shaft/yoke?

there is many things it can be. You need to figure out if it is the transfer case or upfront. Is it only while turning, or under load? You need to go into more details.

I can get to all my grease fittings with a standard gun. I have to rotate the shaft.
 
Something with the front driveline - most likely u-joint. Check to see if there is any play in either front driveshaft u-joint or front pinion. A description of the "funny sound", where it's coming from, and under what conditions will help us identify it's cause.
 
roddie1154 said:
the sound comes from under the gear shift levers (i think) well sumwer around that area, while turning but only during 4wd. example, while making a u turn..

For some reason when I think of U turn, I'm thinking pavement. Are you running 4x4 on pavement? I had to ask.
 
yes very. All your tires are spinning at diffrent speeds while turning and the drive train is trying to turn them at the same speed.
 
use 4x4 only off of pavment. I would take it off road and see what it does(if you broke anything). when you did these u turns did you press on the gas while turning? did the tires slip or try to slip while turning when you gave it gas? Did you lock the front manual hubs?

driving on dirt, mud or sand you can turn all you want in 4x4.
 
roddie1154 said:
nope, i went real slow... but ive done this about 3 times.
i thought all 4 wheels lock when we want it to, by turning the things on the wheels.

Well there is alot to learn. an a stock fj40 usally only 2 tires spin at once, 1 front and one rear. You need to go to www.howthingswork.com and look up differantals. Probably going slow you might be okay.

did you get tire noise like the front tire spinning?
 
roddie1154 said:
how do i know if the front manual hubs are locked? and if they're unlocked can i drive 4wheels on pavement?

You would know if your hub is locking or not if does what it is supposed to do because you have to get out and lock them with your fingers on the front 2 tires.
 
Do you have an owner manual? It tells you how to do alot of stuff.

This is a FJ40 right? What year is it? Does it have a straight 6 in it? What size tires does it have?
 
Back
Top Bottom